MODEL: 6DVI

6DVI SPECIFICATIONS

ES-4216 Rev.5 Page 2/4

http://www.m-system.co.jp/

PERFORMANCE

Accuracy: ±0.01 mA

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) at 4 – 20 mA

input

HOW TO CALCULATE ACCURACY AGAINST SCALE

Example 1: 4 – 20 mA input, Scale 0 – 100

Accuracy = 0.01 mA ÷ (20 – 4)mA × 100 = 0.063 %

Display Error = (100 – 0) × 0.063 % = ±0.063 digits

Example 2: 10 – 20 mA input, Scale 100 – 1000

Accuracy = 0.01 mA ÷ (20 – 10)mA × 100 = 0.1 %

Display Error = (1000 – 100) × 0.1 % = ±0.9 digits

STANDARDS & APPROVALS

Refer to the manuals to comply with the standards.

EU conformity:

ATEX Directive (for ATEX intrinsic safety)

Ex ia EN 60079-11

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Safety approval:

FM: Intrinsically safe

Class I, Div. 1, Groups A, B, C and D

Class I, Zone 0, AEx ia IIC (US)

Class I, Zone 0, Ex ia IIC (Canada)

T4 and T5

(Class 3600)

(Class 3610)

(ANSI/ISA 60079-0)

(ANSI/ISA 60079-11)

(CAN/CSA-C22.2 E60079-0)

(CAN/CSA-C22.2 E60079-11)

(EN 60079-0)

(EN 60079-11)

II 1G, Ex ia IIC; T4, T5, Ga

ATEX: Intrinsic safety

SAFETY PARAMETERS

Operating temperature

Temp. class: Operating temperature

T4: -40 to +85°C

T5: -40 to +60°C

Intrinsic safety Ex data

Ui: (Vmax) 28 V DC

Ii: (Imax) 120 mA DC (Max. current allowed for the

safety approval; Not to guarantee the product’s

performance.)

Pi: (Pmax) 0.84 W

Ci: 1.0 nF

Li: 0 mH

DISPLAY DESCRIPTIONS

■ DISPLAY DIGITS

The decimal point position may shift according to the

required number of digits for the integer section, even when

more than one decimal places have been specified.

However, when the number of decimal places is set to 3,

the ‘0’ in the integer section is not shown in order to secure

the number of effective digits, as explained in the table

below.

The ‘0’ is displayed when the number of decimal places is

set to 2, though the number of effective digits in this case is

reduced by 1 digit compared from the 3 decimal places.

Select appropriately for the application. Refer to

‘Programming Procedure’ for how to choose decimal point

positions.

3

DATA DISPLAY

DECIMAL

VALUE

2

-1.000 thr . -1.999

-0.001 thr . -0.999

-1.00 thr . -1.99

-0.01 thr . -0.99

...

...

...

...

Over-scale

DATA DISPLAY

ERROR TYPE

Under-scale

Setting error

Security code error

■ ERROR INDICATION

The data display blinks when an abnormality is detected.

The unit display backlight also blinks.

When the setting error or the security code error occurs, press

ENTR / ESC button once to cancel the error status and proceed

to set again.