MODEL: M2BS-8

M2BS-8 SPECIFICATIONS

ES-5006 Rev.10 Page 1/4

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

INSTALLATION BASE (8 positions)

Functions & Features

• Receiving at the maximum of 8 modules of Mini-M series

signal conditioners

• Connector output

• Power supplied through printed wiring on the base

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

Model

SPAN

ZERO

MODEL: M2BS–8[1][2]

ORDERING INFORMATION

• Code number: M2BS-8[1][2]

Specify a code from below for each of [1] and [2].

(e.g. M2BS-8U2/D/UL)

[1] FUNCTION

U1: Fujitsu FCN type I/O connector (UL not available)

U2: Omron I/O connector

[2] OPTIONS (multiple selections)

Mounting

blank: Surface

/D: DIN rail mounting adaptor

Standards & Approvals

blank: Without UL

/UL: UL approval

RELATED PRODUCTS

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Capacity: 8 positions

Connection

Power input: M3 screw terminals (torque 0.8 N·m)

Input and output: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

INSTALLATION

Power input: Refer to signal conditioner data sheet. Choose

the same power input specification for all units.

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: wall; optional DIN rail mounting available

(in horizontal direction only)

Weight: 780 g (1.72 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

(input to output to power to FG)

Dielectric strength: 2000 V AC @1 minute (input to output

to power to FG)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

Voltage at the field I/O terminals (except power input

terminals) limited within 30 V DC for UL.