2. Ensure the capacitive load at the output is ≤ 50 pF. This is not a hard limit, however it will ensure

optimal performance. This can be accomplished by providing short, appropriately sized traces from the

SN74HCS02-Q1 to the receiving device(s).

output current from the Absolute Maximum Ratings is not violated. Most CMOS inputs have a resistive load

measured in megaohms; much larger than the minimum calculated above.

4. Thermal issues are rarely a concern for logic gates, however the power consumption and thermal increase

can be calculated using the steps provided in the application report, CMOS Power Consumption and Cpd

Calculation.

9.2.3 Application Curves

R

S

Q

Figure 9-2. Application timing diagram

SN74HCS02-Q1

SCLS755C – JULY 2019 – REVISED MARCH 2021

www.ti.com

12

Submit Document Feedback

Copyright © 2021 Texas Instruments Incorporated

Product Folder Links: SN74HCS02-Q1