MODEL: BS-16

BS-16 SPECIFICATIONS

ES-3435 Rev.9 Page 1/3

http://www.m-system.co.jp/

INSTALLATION BASE (16 positions)

Functions & Features

• Saving individual wiring work for panel installation of the

H-UNIT modules

• High-density mounting

• 16 outputs available at the connector

• Printing wiring for line voltage distribution

• Monitoring at screw terminals

MODEL: BS-16[1][2]

ORDERING INFORMATION

• Code number: BS-16[1][2]

Specify a code from below for each of [1] and [2].

(e.g. BS-16H1/Q)

• Specify the specification for option code /Q

(e.g. /C01)

CAPACITY

16: 16 units

[1] FUNCTION

H1: Input & output connector plus power distribution

H2: Loop powered isolator use (output connector)

H3: Power distribution

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Only solder side of the main PWB is coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Resistor module (model: REM-x)

• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS

Capacity: 16 positions

Connection: M3.5 screw terminals (torque 0.8 N·m)

and 40-pin connector(s)

Screw terminal: Nickel-plated steel

Isolation

BS-16H1: I/O connector to power to ground

BS-16H2: Input to output terminals or connector to ground

BS-16H3: Input to output or connector to power to ground

INPUT & OUTPUT

■ BS-16H1

Input: DC voltage; resistor module (model: REM-x) attached

to the input terminals for current input

Output: DC voltage or current*

Connection: Screw terminals and 40-pin connector

Power input: 16 loops collectively

■ BS-16H2 (model HSN use)

Input: Loop powered isolator (4 – 20 mA DC or 10 – 50 mA

DC)

Output: 1 – 5V DC or 4 – 20 mA DC*

Connection: Screw terminals and 40-pin connector

Power input: Not required

■ BS-16H3

Input: DC voltage; resistor module (model: REM-x) attached

to the input terminals for current input

Output: DC voltage or current

Connection: Screw terminals

Power input: 16 loops collectively

*For current signals, either screw terminal or 40-pin

connector is available.

INSTALLATION

Power input

•DC: 24 V DC ±10 %

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface

Weight: 1.8 kg (4.0 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

BS-16H1: 500 V AC @ 1 minute

(I/O connector to power)

1500 V AC @ 1 minute (power to ground)

500 V AC @ 1 minute (I/O connector power to ground)

BS-16H2: 500 V AC @ 1 minute

(Input to output terminals or connector to ground)

BS-16H3: 500 V AC @ 1 minute

(Input to output to power)