5. 标示 Marking

保险丝两端铜帽上应印有下列标示：The fuse shall have the following marking :

A 帽：良胜型号+慢断型符号+额定电流+低分断符号+额定电压

5K

T

1.6A

L

250V

B 帽：良胜标志+认证符号

B Cap：Lanson’s logo + Approved Symbol

6. 外观 Appearance

6.1 外观不应有显著的污点、裂纹。

There shall not be any remarkable stain，rust or crack on the appearances.

6.2 标示应该很容易辨识。

Marking shall be easily legible.

7. 机械特性 Mechanical characteristics

拉力强度试验 Tensile test

将保险丝固定好后，对保险丝两端引线施加 10N 的轴向拉力，持续 1 分钟。试验过后，保险丝

没有任何破损现象。

Exert the axial pulling force of 10N to the both ends of lead wire for 1 minute. After the test the fuse

shall be no damage and loosening.

8. 电气特性 Electrical characteristics

8.1 实验条件 Test condition

8.2 分断能力 Interrupting rating test

保险丝能承受的分断能力：35A 或 10 倍的额定电流当中较大的。分断能力测试后测得保险

The fuse interrupting capacity：35A or 10 times the rated current whichever is greater. After

LM5K1160AP

Rev :

www.leiditech.com

01.06.2018

2/4