AD9986

Preliminary Technical Data

Rev. PrA | Page 4 of 5

ABSOLUTE MAXIMUM RATINGS

Table 1.

Parameter

Rating

ISET, DACxP, DACxN, TDP, TDN

−0.3 V to AVDD2 + 0.3 V

VCO_COARSE, VCO_FINE,

VCO_VCM, VCO_VREG

−0.3 V to AVDD2_PLL + 0.3 V

ADC0P, ADC0N, ADC1P, ADC1N

−0.3 V to BVDD2 + 0.3 V

VCM0, VCM1

−0.3 V to RVDD2 + 0.3 V

CLKINP, CLKINN

−0.2 V to PLLCLKVDD1 + 0.2 V

ADCDRVN, ADCDRVP

−0.2 V to CLKVDD1 + 0.2 V

SERDINx±, SERDOUTx±

−0.2 V to SVDD1 + 0.2 V

SYSREFP, SYSREFN,

and SYNCxIN±

−0.2 V to +2.5 V

SYNCxOUT±, SYNCxIN±, RESET,

TXENx, RXENx, IRQx, CS, SCLK,

SDIO, SDO, TMU_REFN,

TMU_REFP, ADCx_SMON0,

ADCx_SMON1, ADCx_FD0,

ADCx_FD1, GPIOx

−0.3 V to DVDD1P8 + 0.3 V

AVDD2, AVDD2_PLL, BVDD2,

RVDD2, SVDD2_PLL, DVDD1P8

−0.3 V to +2.2 V

PLLCLKVDD1, AVDD1,

AVDD1_ADC, CLKVDD1,

FVDD1, DAVDD1, DVDD1_RT,

DCLKVDD1, SVDD1,

SVDD1_PLL

−0.2 V to +1.2 V

VNN1

−1.1 V to +0.2 V

Temperature

120°C

Storage Range

−40°C to +150°C

1

Do not exceed this temperature for any duration of time when the device is

powered.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

REFLOW PROFILE

The AD9986 reflow profile is in accordance with the JEDEC

JESD 20 criteria for Pb-free devices. The maximum reflow

temperature is 260°C.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. The use of appropriate

thermal management techniques is recommended to ensure that

resistance measured in a one cubic foot sealed enclosure.

Package

Type

Airflow Velocity

(m/sec)

Unit

BP-324-3

0.0

11.7

0.40

2.3

°C/W

1

Thermal resistance values specified are simulated based on JEDEC specifications

in compliance with JESD51-12 with the device power equal to 9 W.

ESD CAUTION