Preliminary Factsheet 02.100

January 2020

These specifications are subject to change without notice.

01/03/2020

© 2020 Greenliant

1

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Features

• Industry Standard SATA Host Interface

–

SATA 1.5Gb/s, 3Gb/s and 6Gb/s

–

SATA Revision 3.2

–

ATA/ATAPI-8 compliant

–

Supports 48-bit address feature set

–

Native Command Queuing (NCQ)

up to 32 commands

• Performance

–

Sequential data read: Up to 410 MByte/sec

–

Sequential data write: Up to 115 MByte/sec

(128KB transfer size tested in VDBench on Linux)

• Power Management

–

3.3V and 1.0V power supply

–

Host initialized power management (HIPM)

–

Device initialized power management (DIPM)

• Power Specifications

–

Active mode:

128GB: Up to 2860mW

64GB: Up to 1980mW

32GB: Up to 1540mW

16GB: Up to 1200mW

8GB: Up to 1200mW

–

Idle / Standby mode: <355mW

–

DevSleep mode: <70mW

• Expanded Data Protection

–

Added data security through user-selectable

protection zones

–

Secure Erase (data sanitization)

• 20-Byte Serial Number

–

Factory pre-programmed 10-Byte unique ID

–

User-programmable 10-Byte ID

• Supports SMART and TRIM Commands

• Robust Built-in ECC

• Thermal Throttling

• NAND Configuration

–

2 bits per cell (3D MLC NAND)

• Endurance

–

Program/Erase (P/E) Cycles: 5K

• Operating Temperature Range

–

Industrial: -40°C to 85°C

• BGA package

–

14.0 mm x 24.0 mm x 1.40 mm, 145-ball,

1.0 mm ball pitch, LBJE (8GB, 16GB, 32GB,

64GB)

–

14.0 mm x 24.0 mm x 1.95 mm, 145-ball,

1.0 mm ball pitch, FZJE (128GB)

• All Devices are RoHS Compliant

Product Description

The GLS85LS1008C / 1016C / 1032C / 1064C /

1128C Industrial Temperature SATA NANDrive™

devices (referred to as “SATA NANDrive” in this

factsheet) are fully integrated solid state drives. They

combine an advanced Greenliant NAND controller

and 8, 16, 32, 64 or 128 GBytes of NAND flash in a

multi-chip package. These products are ideal for

embedded and portable applications that require small

form factor and reliable data storage.

Serial ATA (SATA)-interface solid state mass storage

technology is widely used in industrial PCs, single

board computers, servers, networking appliances,

HMI

and

digital

signage

displays,

test

and

measurement

instrumentation,

multi-functional

printers, robotics, video

equipment and security

systems.

SATA NANDrive is a single device, solid state drive

(SSD) that provides the functionality and compatibility

of a complete SATA hard disk drive (HDD) in a 14 mm

x 24 mm BGA package for easy, space saving

mounting to a system motherboard. These products

surpass traditional storage in their small size, security,

reliability, ruggedness and low power consumption.

The integrated NAND flash controller with built-in

advanced

NAND

management

firmware

communicates with the host through the standard

SATA protocol. It does not require any additional or

proprietary software such as the Flash File System

(FFS) and Memory Technology Driver (MTD).

SATA NANDrive is pre-programmed with a 10-Byte

unique serial ID and has the option of programming

an additional 10-Byte serial ID for even greater

system security.

SATA NANDrive’s advanced NAND management

technology enhances data reliability and security,

improves endurance and accurately estimates the

remaining life of the NAND flash devices. This

innovative

technology

combines

robust

NAND

controller hardware error correction capabilities with

advanced wear-leveling algorithms and bad block

management to significantly extend the life of the

product.

SATA NANDrive devices are offered in a 145-ball

BGA, 1 mm ball pitch package.