Core Splice Adhesive Film

AF 3002

Storage and Handling

Storage at 40°F (4°C) or below is suggested for 3M™ Scotch-Weld™ Core Splice

Adhesive Film AF 3002 to obtain maximum shelf life. Our data indicates, however,

that no loss in mechanical properties is obtained after aging at 75°F ± 5°F (24°C ±

2°C) for 7 days.

Care must be taken when handling Scotch-Weld AF 3002 at low temperatures

because is can easily crack. Warm Scotch-Weld AF 3002 to ambient conditions in

the sealed package to prevent moisture condensation on the adhesive surface.

To request additional product information or to arrange for sales assistance, call toll free (800) 235-2376.

Our fax number is (417) 869-5219. Address correspondence to: 3M Aerospace Central, 3211 E. Chestnut

Expressway, Springfield, MO 65802.

For Additional

Information

Refer to Product Label and Material Safety Data Sheet for health and safety information before using this

product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.

Precautionary

Information

3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is

responsible for determining whether the

3M product is fit for a particular purpose and suitable for user’s

method of application. Please remember that many factors can affect the use and performance of a

3M

Engineered Adhesives Division product in a particular application. The materials to be bonded with the

product, the surface preparation of those materials, the product selected for use, the conditions in which

the product is used, and the time and environmental conditions in which the product is expected to

perform are among the many factors that can affect the use and performance of a

3M product. Given the

variety of factors that can affect the use and performance of a

3M product, some of which are uniquely

within the user’s knowledge and control, it is essential that the user evaluate the

3M product to determine

whether it is fit for a particular purpose and suitable for the user’s method of application.

Important Notice

If the

3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO

REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE

3M PRODUCT.

3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or

consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,

warranty, or strict liability.

Limitation of Remedies

and Liability

This Engineered Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002 standards.

ISO 9002

Printed in U.S.A.

©3M 2002

78-6900-1315-2

(6/02)

Recycled Paper

40% pre-consumer

10% post-consumer

3

Aerospace Department

Engineered Adhesives Division

3M Center, Building 220-8E-05

St. Paul, MN 55144-1000

www.3M.com/aerospace

- 7 -