| поискавой системы для электроныых деталей |
|
UPD17P136ACT датащи(PDF) 29 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD17P136ACT датащи(HTML) 29 Page - NEC |
|
29 / 292 page ![]() CHAPTER 2 PIN FUNCTIONS 10 Pin No. Pin name Function Output At reset 17 P1B0/VPP Note1 Used as port 1B, or programming voltage supply pin in Input Input program memory write/verify mode. • P1B0 • 1-bit input port • A pull-up resistor can be internally connected by mask option Note2 • VPP • Available for the µPD17P136A and µPD17P137A only • Applies programming voltage (+12.5 V) at program memory writing/verification 18 P1A3 Port 1A N-ch open Input | | • 4-bit input/output port drain 21 P1A0 • Input/output setting in 4-bit unit • A pull-up resistor can be internally connected by mask option Note2 22 P0D3/TM0OUT Used as port 0D, or timer 0 carry output, serial data input, N-ch open Input serial data output, and serial clock input/output pins drain A pull-up resistor can be internally connected by mask option Note2 • P0D3 to P0D0 • 4-bit input/output port • Input/output setting in 1 bit unit • TM0OUT • Timer 0 carry output 23 P0D2/SI • SI • Serial data input 24 P0D1/SO • SO • Serial data output 25 P0D0/SCK • SCK • Serial clock input/output 26 XOUT In the case of the µPD17135A/17137A/17P137A — — 27 XIN/CLK Note3 • XIN, XOUT • Connected to a resonator for system clock oscillation • The ceramic resonator is connected. • CLK • Available for the µPD17P137A only • Clock input pin for address updating at program memory writing/verification 26 OSC0 In the case of the µPD17134A/17136A/17P136A 27 OSC1/CLK Note3 • OSC0, OSC1 • Connected to a resonator for system clock oscillation • Resistor is connected between OSC0 and OSC1. • CLK • Available for the µPD17P136A only • Clock input pin for address updating at program memory writing/verification 28 VDD Power supply — — In the program memory write/verify mode of the µPD17P136A/17P137A, +6 V is applied. Notes 1. The VPP pin is valid only with the µPD17P136A and 17P137A. 2. The µPD17P136A and 17P137A do not have a pull-up resistor connected by mask option. 3. The CLK pin is valid only with the µPD17P136A and 17P137A. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |