Contact Adhesive 2000-NF with Spray Activator #1

- 3 -

Application Equipment

Suggestions

Note: Appropriate application equipment can enhance adhesive performance. We suggest

the following application equipment for the user’s evaluation in light of the user’s

particular purpose and method of application.

Air Atomizing Spray Equipment:

When hand spraying, plural component (co-spray) applicators are used. These

applicators spray activator and adhesive through separate fluid nozzles with mixing

occurring outside the spray applicator.

For automatic spray systems, separate spray applicators are used for the activator and

adhesive, with the applicators aimed so the spray patterns converge and mix together

before reaching the substrate.

Note: Premixing of the adhesive and activator prior to spraying is NOT possible

and makes the adhesive unusable.

Hand Held Spray

Atomizing Air

Approximate Air

Applicators

Air Cap

Fluid Nozzle

Pressure

Requirement

Binks Mach 1PC

91 PC

94F (.055")

15-30 psi

6 scfm @ 15 psi

H.V.L.P.

Graco Optimizer 2K

188-754

185-702 (.055")

25-35 psi

6 scfm @ 15 psi

H.V.L.P.

Mattson Cross-Fire

81270

82017 (.050")

15-30 psi

6 scfm @ 15 psi

H.V.L.P.

DeVilbiss Pro Bond 2K

28L

FF (.055")

25-35 psi

6 scfm @ 15 psi

Automatic Spray

Atomizing Air

Approximate Air

Applicators

Air Cap

Fluid Nozzle

Pressure

Requirement

Binks Mach 1PC

91 PC

94F (.055")

15-30 psi

6 scfm @ 15 psi

H.V.L.P.

Binks Mach 1A

91 P

94F (.055")

15-30 psi

11 scfm @ 30 psi

H.V.L.P. (Adhesive)

Binks Mach 1A

91 P

90F (.030")

15-30 psi

11 scfm @ 30 psi

H.V.L.P. (Activator)

Binks 21, 61, 95A

66SD-3

65SS (.059")

15-30 psi

6 scfm @ 15 psi

(Adhesive)

Binks 21, 61, 95A

66S

63SS (.028")

10-15 psi

3.4 scfm @ 30 psi

(Activator)

DeVilbiss AGX

30

FF (.055")

15-30 psi

6 scfm @ 20 psi

(Adhesive)

DeVilbiss AGX

30

G (.028")

10-15 psi

6 scfm @ 20 psi

(Activator)

DeVilbiss AGXV

33A

FF (.055")

15-30 psi

12 scfm @ 30 psi

H.V.L.P. (Adhesive)

DeVilbiss AGXV

33A

G (.028")

10-15 psi

6 scfm @ 20 psi

H.V.L.P. (Activator)

TO MEASURE FLUID FLOW

Hand Held Applicators: Pressurize adhesive source only. Direct adhesive fluid nozzle into a

measuring device. Pull trigger and flow material into measuring device for 60 seconds. Increase

or decrease fluid source pressure to obtain desired fluid flow. The fluid flow of the activator

should be adjusted to 15 to 1 ratio when co-sprayed. The measurement can be done by either

weight or volume.

Automatic Applicators: Pressurize adhesive fluid source only. Activate trigger and flow adhesive

into measuring device for 60 seconds. Increase or decrease fluid pressure to obtain desired

fluid flow. When adhesive fluid flow is correctly adjusted repeat the process with the activator spray

applicator, setting fluid flow to one-fifteenth of the adhesive fluid flow. The measurement can be

done by either weight or volume.