519Y • 519YS • 519YT • 519YP2 • 519YP2S • 519YP2T

519YP • 519YPS • 519YPT

Features (cont.)

• Tan rubber backing is thick yet easy to cut, reducing wear on plotter knives or die-

cutting equipment.

• Clear, polyester outer, release liners of 3M sandblast stencil product 519YP and 519YP2

series allows for faster stencil to stone alignment and cleaner hole punching and tracking

through computer plotters.

• Polypropylene outer, release liner of 3M sandblast stencil product 519Y series

provides a more conformable product to run through computer plotters.

Application Ideas

• Protects granite, marble, wood and other stone surfaces during sandblasting operation,

stencil should be rubbed down firmly to achieve maximum adhesion.

• 3M™ Sandblast Stencil Products should be applied to a warm, clean and dry surface.

When the stencil is applied to cold stone surfaces it is possible for condensation to form as

the stone warms. Condensation can affect the performance of the stencil’s adhesive system.

• 3M™ Sandblast Filler #2 can be used on polished surfaces if increased adhesion is desired.

• 3M™ Sandblast Filler #3 can be used on axed or frosted surfaces if increased

adhesion is desired.

Storage

Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative

humidity in the original packaging material..

Shelf Life

To obtain best performance, use this product within 12 months from date of

manufacture.

Technical

Information

The technical information, recommendations and other statements contained in this document are

based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such

information is not guaranteed.

Product Use

Many factors beyond 3M

’s control and uniquely within user’s knowledge and control can affect the use

and performance of a 3M product in a particular application. Given the variety of factors that can affect

the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and

determining whether it is fit for a particular purpose and suitable for user

’s method of application.

Warranty,

Limited Remedy,

and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product packaging or product

literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time

3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY

OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M

’s

option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,

whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,

including warranty, contract, negligence or strict liability.

ISO 9001

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

800-362-3550 • 877-369-2923 (Fax)

www.3M.com/industrial

Recycled Paper

40% pre-consumer

10% post-consumer

3M is a trademark of 3M Company.

Printed in U.S.A.

©3M 2016 (5/16)