3M Medical Materials & Technologies

Product Number 1774T

Effective: March 2020

Supersedes all previous versions

Features and Benefits:



Non-Sensitizing per ISO:10993



Easy to Handle/Apply



Conformable¹ & Cushioning



ETO and Radiation Sterilization Compatible



Opaque Medium Tan



Composition: Tape is ~22 mils [0.6 mm] thick without release liner target thickness.

Backing

Adhesive

Non-tackified Acrylic-based, developed for skin contact

Liner

63 lbs. Bleached Poly-coated Kraft paper, silicone release on

one side, 4.6 mils ± 0.4 mils (0.12 mm ± 0.01 mm), printable

Please note - The following technical information should be considered representative or typical only

and should not be used for specification purposes.

Adhesion to Stainless Steel*, 180 deg

15.2 ounces/inch width (430 g/25mm width)

(4.2 N/25 mm)

Liner Release*, average

25 grams/inch width (25 gm/25 mm width)

Roll Description: Tape supplied on 3 inch (76 mm) diameter cores.

Length, Maximum

400 yards (366 meters) + 2 %

Width, Maximum

48 inches (122 cm) + 1/16 inch (1.5 mm)

Splices: Splices on the tape are intended for continuous processing.

Roll Width

Maximum Number of Splices per Roll

< 8 inches (20 cm)

2 per 150 yards (137 meters)

Information on the splice frequency in roll

widths greater than 8 inches (20 cm) is

available upon request.

4 per 289 yds. (264 m)

6 per 400 yds. (366 m)

Rollstock Shelf Life and Recommended Storage:

Product as supplied in original packaging will maintain stated properties for a period of two (2) years

from date stamped on shipping container when stored at temperatures of 50-80ºF (10-27ºC) and a

relative humidity between 40-60 percent.

Please see reverse side for important product, safety and warranty information.

recommend our OEM customers run their own studies using their device design.