7.3.1.4 Wide Supply Range

The INA280-Q1 operates with a wide supply range from a 2.7 V to 20 V. The output stage supports a full-scale

measurements. For a gain of 20 V/V, the maximum differential input acceptable is 1 V.

7.4 Device Functional Modes

7.4.1 Unidirectional Operation

The INA280-Q1 measures the differential voltage developed by current flowing through a resistor that is

commonly referred to as a current-sensing resistor or a current-shunt resistor. The INA280-Q1 operates in

unidirectional mode only, meaning it only senses current sourced from a power supply to a system load as

shown in Figure 7-3.

+

±

Buffer

Current

Feedback

RL

R1

R1

Bias

48-V

Supply

Load

IN+

IN±

5 V

OUT

GND

Figure 7-3. Unidirectional Application

The linear range of the output stage is limited to how close the output voltage can approach ground under zero-

input conditions. The zero current output voltage of the INA280-Q1 is very small, with a maximum of GND + 25

mV. Make sure to apply a sense voltage of (25 mV / Gain) or greater to keep the INA280-Q1 output in the linear

region of operation.

7.4.2 High Signal Throughput

With a bandwidth of 1.1 MHz at a gain of 20 V/V and a slew rate of 2 V/µs, the INA280-Q1 is specifically

designed for detecting and protecting applications from fast inrush currents. As shown in Table 7-2, the INA280-

Q1 responds in less than 2 µs for a system measuring a 75-A threshold on a 2-mΩ shunt.

Table 7-2. Response Time

PARAMETER

EQUATION

INA280-Q1

G

Gain

20 V/V

Maximum current

100 A

Threshold current

75 A

Current sense resistor value

2 mΩ

Output voltage at maximum current

4 V

Output voltage at threshold current

3 V

SR

Slew rate

2 V/µs

Output response time

< 2 µs

www.ti.com

INA280-Q1

SBOSA48 – NOVEMBER 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

13

Product Folder Links: INA280-Q1