X11SSL datasheet(28/124 Pages) ETC1

номер детали	X11SSL

подробное описание детали	X11SSM(-F)/X11SSL(-F) User Manual

PDF	124 Pages

Scroll/Zoom	100%

производитель	ETC1 [List of Unclassifed Manufacturers]

домашняя страница

Logo

28 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual

Thermal Grease

Heatsink

Fins

Installing an Active CPU

Heatsink with Fan

1. Locate the CPU fan power connector on

the motherboard. (Refer to the layout on

the right for the CPU fan location.)

2. Position the heatsink so that the heatsink

fan wires are closest to the CPU fan

power connector and are not interfering

with other components.

3. Inspect the CPU fan wires to make sure

that the wires are routed through the

bottom of the heatsink.

4. Remove the thin layer of protective film

from the heatsink.

Important: CPU overheating may oc-

cur if the protective film is not removed

from the heatsink.

5. Apply the proper amount of thermal

grease on the CPU.

Note: If your heatsink came with a ther-

mal pad, please ignore this step.

6. If necessary, rearrange the wires to

make sure that the wires are not pinched

between the heatsink and the CPU. Also

make sure to keep clearance between the

fan wires and the fins of the heatsink.

Recommended Supermicro heatsink:

SNK-P0046A4 or SNK-P0051AP4

active heatsink

(2U+ or 4U chassis)

X11SSL датащи(PDF) 28 Page - List of Unclassifed Manufacturers