X11SSL-F datasheet(92/124 Pages) ETC1

92 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual



COM1 Console Redirection Settings

This feature allows the user to specify how the host computer will exchange data with the

client computer, which is the remote computer used by the user.

COM1 Terminal Type

This feature allows the user to select the target terminal emulation type for Console

Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color and

function key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8

to use UTF8 encoding to map Unicode characters into one or more bytes. The options are

VT100,

VT100+, VT-UTF8, and ANSI.

COM1 Bits Per second

Use this feature to set the transmission speed for a serial port used in Console Redirection.

Make sure that the same speed is used in the host computer and the client computer. A lower

transmission speed may be required for long and busy lines. The options are 9600, 19200,

38400, 57600 and

115200 (bits per second).

COM1 Data Bits

Use this feature to set the data transmission size for Console Redirection. The options are

7 Bits and

8 Bits.

COM1 Parity

A parity bit can be sent along with regular data bits to detect data transmission errors. Select

Even if the parity bit is set to 0, and the number of 1's in data bits is even. Select Odd if the

parity bit is set to 0, and the number of 1's in data bits is odd. Select None if you do not want

to send a parity bit with your data bits in transmission. Select Mark to add a mark as a parity

bit to be sent along with the data bits. Select Space to add a Space as a parity bit to be sent

with your data bits. The options are

None, Even, Odd, Mark, and Space.

COM1 Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial data

communication. Select 2 Stop Bits if slower devices are used. The options are

1 and 2.

COM1 Flow Control

Use this feature to set the flow control for Console Redirection to prevent data loss caused

by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer is full.

Send a "Start" signal to start sending data when the receiving buffer is empty. The options

are

None and Hardware RTS/CTS.

COM1 VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The

options are Disabled and

Enabled.

X11SSL-F датащи(PDF) 92 Page - List of Unclassifed Manufacturers

X11SSL-F датащи(HTML) 92 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL