V14

2

Specifications

LDP15 Derating Curve

INPUT SPECIFICATIONS:

AC Input Voltage …....………...............…..................................... 90~264Vac

Frequency ………………………………………….……….……..... 47 to 63Hz

Inrush Current ……………….......... 40A max @240Vac, 25℃ Ta Cold Start

Leakage Current ………………….….………….….………….. ＜0.5 mA max.

Standby Power Consumption …………………...…………………. 0.5W max.

OUTPUT SPECIFICATIONS:

Voltage Accuracy .………………….……………………………..…… ±5% max.

Constant Current Accuracy (note1) …….………….…….…………… ±5% max.

Current Line Regulation (note2) ……..…………………….…………. ±5% max.

Current Load Regulation (note3) …………………..………….……. ±5% max.

Over Voltage Protection …….……………..…………………...…… TVS Clamp

Short Circuit Protection ………..…..……..….. Hiccup Mode, Auto Recovery

DALI Dimming ……………………….……………….………………… 5~100%

GENERAL SPECIFICATIONS:

Efficiency …………………………………………………………….... 84% typ.

Isolation Voltage, Input to Output ………….………………….…… 3.00KVac.

Isolation Resistance, Input to Output …………..…………………... 10

Surge Voltage Between L-N ……….……………………………………… 2KV

SAFETY AND EMC:

Safety …………..……………………………......... EN61347-1, EN61347-2-13

EMI ……………………..………………..…..…… EN55032/EN55015 Class B

EMS ……………………………………….…..…..... EN61000-4-2, 3, 4, 5, 6, 11

Harmonic Current ………………………………….….. EN61000-3-2, 3 Class A

MECHANICAL CHARACTERISTICS:

ENVIRONMENTAL CHARACTERISTICS:

Dimensions ..…….…..….... 3.780x1.574x0.984 Inches (96.0x40.0x25.0mm)

Operating Ambient Temperature …..... -25℃ ~ 70℃,50℃~70℃@-3%/℃

Weight………………………………………………….…………………….. 100g

Cooling …………………………………………………. Natural Convection

NOTE:

Storage Temperature, Humidity …….…......... -40 ~ 85℃, 20%~95% RH

1. Current accuracy is set at nominal input voltage and full load.

Operating Altitude Max. …..…………………………. Sea Level to 3000m

2. Current line regulation is measured from high line to low line with full load.

Temperature Coefficient ……………………………… ±0.03%/℃(0~50℃)

3. Current load regulation is measured from 75% to 100% output rated voltage max.

4. All specifications are typical at 230 Vac, Vo max, full load and 25℃ Ta

unless other noted.

Mechanical Specification

All specifications are Typical at AC Input Voltage 230 Vac, full load and 25˚C unless otherwise noted