Express-BASE7

Features

●

Supports up to four 10GBASE-KR and associated sideband signals

●

Supports NC-SI interface

●

One PCI Express x16 slot, Two PCI Express x8 slots

●

Supports 10GbE adapter card via PCIe x16 slot

●

Dual BIOS (SPI bus)

●

New

Specifications

PICMG COM Express Revision 3.0

Supports Type7 module in Basic or Compact form factor

305 mm x 244 mm (ATX)

1 PCI Express x16 slot

2 PCI Express x8 slots

Onboard diagnostics for BIOS POST code data and address on LPC bus

Onboard socket for secondary SPI flash

Winbond WF83627DHG on LPC bus

I2C to GPIO bridge PCA9535

Two 220-pin board-to-board connectors (Type 7)

Up to four 10GBASE-KR and related sideband signals

1 PCI Express x16 slot routes signals from COM Express module to 10GbE

card adapter (proprietary pinout)

10/100/1000BASE-T

compatible RJ-45 on I/O panel

GbE_SDP support

NC-SI interface connect COM Express module and IPMI BMC

IPMI BMC (Lite version) on carrier board

Note: support by project basis

2x SATA ports

4x USB 3.0/2.0 ports

2x DB-9 on I/O panel (from Winbond Super I/O)

2x onboard 10-pin header (from COM Express module)

2x 6-pin mini-DIN

SMBus, I2C, module control signals

Reset, Power LED, HDD LED, Buzzer