Embedded boards

Model: AP.CP01

Multi-function IPQ6018 Embedded Board with on-board WiFi

2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA

KEY FEATURES

•

Quad-core ARM 64bit A53 @1.8GHz Processor

•

1GB DDR3L System Memory

•

32MB NOR Flash, 256MB NAND Flash

•

Supports Dynamic Frequency Selection (DFS)

•

2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate

•

2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate

APPLICATIONS

•

802.11ax MU-MIMO OFDMA Access Point

•

Mesh router supporting EasyMesh

•

Smart AP TWT

Specifications

Chipset

Qualcomm-Atheros IPQ6018

CPU Frequency

Quad-core ARM 64 bit A53 @1.8 GHz processor

System Memory

1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design

NAND Flash

256MB

NOR Flash

32MB

Ethernet Port

5x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port

NGFF Slot

M.2 (NGFF) “E Key” Socket with PCIe 3.0

SD Card Slot

1x SD Card Slot

DC Jack Input

1x DC Jack Connector: DC 12V

Power consumption (Board only)

17W (Max)

On board radio

2 radios

Wireless

On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain

On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 23dBm per chain

4x U.FL Connectors

2.4GHz Data Rate

2x2 MU-MIMO OFDMA Technology, up to 573Mbps

5GHz Data Rate

2x2 MU-MIMO OFDMA Technology, up to 1201Mbps

LED header

FFC/FPC Connector

USB /header

1x USB 2.0 Port, 1x USB 3.0 Type-C Port

Serial Port

1x Serial Port 12 Pin Connector

JTAG Debug Interface

1x JTAG 20 Pin Connector

Push Button Reset

1x Hardware reset

Reference Design

AP.CP01

1.The Serial Port is a 4-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging.

2.The JTAG Port is a 20-pin header. A JTAG kit is for writing your self-developed loader and firmware directly.

Continued on Page 2...