3M

• 9495MP • 9495MPF • 9495B

Typical Physical Properties and Performance Characteristics

Note: The following technical information and data should be considered representative or typical only and should not be

used for specification purposes.

(2)

Product Number

3M™ Double Coated Tape 9492MP

3M™ Double Coated Tapes 9495MP, 9495MPF, 9495B

Adhesion to stainless steel

Oz/in (N/cm) [kg/25.4 mm]

Oz/in (N/cm) [kg/25.4 mm]

ASTM D3330 - 90 degree

- 15 minute RT

45 (4.9) [1.3]

70 (7.7) [2.0]

- 72 hour RT

60 (6.6) [1.7]

80 (8.8) [2.3]

- 72 hour 158°F (70°C)

70 (7.7) [2.0]

90 (9.9) [2.6]

ASTM D3330 - 180 degree, 2 mil Al foil

- 72 hour RT

85 (9.3) [2.4]

100 (10.9) [2.8]

Adhesion to other surfaces*

ASTM D3330 - 90 degree,

2 mil Al foil, 72 hour RT

ABS

50 (5.5) [1.4]

60 (6.6) [1.7]

Acrylic

55 (6.0) [1.6]

60 (6.6) [1.7]

Polycarbonate

35 (3.8) [1.0]

60 (6.6) [1.7]

Shear Strength - ASTM D3654 modified -

1000 grams at 72°F (22°C)

>10,000 minutes

>10,000 minutes

500 grams at 158°F (70°C)

>10,000 minutes

>10,000 minutes

Relative High Temperature

Operating Ranges:

Long Term (days, weeks)

250°F (121°C)

250°F (121°C)

Short Term (minutes, hours)

300°F (149°C)

300°F (149°C)

Dielectric Properties:

3M™ Double Coated Tapes 9495MP,

9495MPF and 9495B

Dielectric Strength

Not Available

1373 volts/mil

Breakdown Voltage

Not Available

7800 volts

Maximum Length

1/4" to 1"

144 yd. (132 m)

1" to 54"

360 yd. (329 m)

Available Widths

Minimum

1/4" (6.35 mm)

Maximum

54" (1372 mm)

Normal Slitting Tolerance

±1/32" (0.8 mm)

Core Size

3.0" (76.2 mm)

Available Sizes

*Not recommended for low energy plastics (polypropylene, polyethylene). For these surfaces, please refer to 3M™ Laminating Adhesive 300MP and 300LSE.

Roll length, width, slitting tolerance, core size.

Available Lengths (Subject to minimum order requirements)