S5000VSA datasheet(54/86 Pages) INTEL

54 / 86 page

Design and Environmental Specifications

Intel® Server Board S5000VSA TPS

Revision 1.4

Intel order number – D36978-006

Design and Environmental Specifications

8.1 Server Board Design Specification

Operation of the server board at conditions beyond those shown in the following table may

cause permanent damage to the system. Exposure to absolute maximum rating conditions for

extended periods may affect system reliability.

Table 26: Board Design Specifications

Operating Temperature

5º C to 50º C

1 (32º F to 131º F)

Non-Operating Temperature

-40º C to 70º C (-40º F to 158º F)

DC Voltage

± 5% of all nominal voltages

Shock (Unpackaged)

Trapezoidal, 50 g, 170 inches/sec

Shock (Packaged) (≥ 40 lbs to < 80 lbs)

24 inches

Vibration (Unpackaged)

5 Hz to 500 Hz 3.13 g RMS random

Note:

Chassis design must provide proper airflow to avoid exceeding the Dual-Core Intel

® Xeon®

processor 5000 sequence maximum case temperature.

Disclaimer Note

: Intel Corporation server boards contain a number of high-density VLSI and

power delivery components that need adequate airflow to cool. Intel ensures through its own

chassis development and testing that when Intel server building blocks are used together, the

fully integrated system will meet the intended thermal requirements of these components. It is

the responsibility of the system integrator who chooses not to use Intel developed server

building blocks to consult vendor datasheets and operating parameters to determine the amount

of air flow required for their specific application and environmental conditions. Intel Corporation

cannot be held responsible, if components fail or the server board does not operate correctly

when used outside any of their published operating or non-operating limits.

S5000VSA датащи(PDF) 54 Page - Intel Corporation