4

Maximum ratings

Stressing the device above the rating listed in the absolute maximum ratings table may cause permanent damage

to the device. These are stress ratings only and operation of the device at these or any other conditions above

those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

Sym

Parameter

Condition (1)

Value (2)

Unit

off)

–55 to 125

°C

Supply voltage

–0.3 to 5.0

V

Lead solder temperature for 10 seconds

260

°C

Input or output voltages

–0.2 to Vcc+0.3

V

Output current

20

mA

Power dissipation

1

W

Electro-static discharge voltage

(human body model)

>1500

V

Electro-static discharge voltage

(robotic charged device model)

>1000

V

1. Test conforms to JEDEC standard.

2. Data based on characterization results, not tested in production.

3. Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.

M41T62, M41T64, M41T65

Maximum ratings

DS3840 - Rev 24

page 22/42