 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
AM652X датащи(PDF) 135 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
AM652X датащи(HTML) 135 Page - Texas Instruments |
|
|
135 / 277 page  135 AM6548, AM6528, AM6546 AM6526, AM6527 www.ti.com SPRSP08I – NOVEMBER 2017 – REVISED DECEMBER 2019 Submit Documentation Feedback Product Folder Links: AM6548 AM6528 AM6546 AM6526 AM6527 Specifications Copyright © 2017–2019, Texas Instruments Incorporated Table 5-12. LVCMOS Buffers (Reset) DC Electrical Characteristics (continued) over recommended operating conditions (unless otherwise noted) PARAMETER SPECIFIC BALL MIN TYP MAX UNIT IIN Input leakage current, pull-up or pull-down inhibited 64 µA Input leakage current, pull-down enabled, VI = VDDS(1) 67 100.7 198 Input leakage current, pull-up enabled, VI = VSS 63 100.3 160 IOZ Total leakage current through the driver/receiver combination, which may include an internal pull-up or pull-down. This value represents the maximum current flowing in or out of the pin while the output driver is disabled, the pull-up or pull-down is inhibited, and the input is swept from VSS to VDD. 64 µA (1) VDDS stands for corresponding power supply. For more information on the power supply name and the corresponding ball, see Table 4- 1, POWER [9] column. (2) Voltage Input High Steady State (VIHSS) should be maintained when the signal is not transitioning. (3) Voltage Input Low Steady State (VILSS) should be maintained when the signal is not transitioning. Table 5-13. LVCMOS-FS Buffers DC Electrical Characteristics over recommended operating conditions (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT BALL NAMES in Mode 0: I2C0_SCL / I2C0_SDA / I2C1_SCL / I2C1_SDA / NMIn BALL NUMBERS: D20 / C21 / B21 / E21 / F18 1.8-V MODE VIH High-level input threshold 1.21 V VIL Low-level input threshold 0.55 V VIHSS Input high-level Steady State(1) 1.7 V VILSS Input low-level Steady State(2) 0.48 V VOH High-level output threshold IOH = 1 mA VDDSHV0 - 0.45 V VOL Low-level output threshold IOL = 1 mA 0.45 V IIN Input leakage current. This value represents the maximum current flowing in or out of the pin while the output driver is disabled and the input is swept from VSS to VDD. VI = VDDSHV0 6 µA VI = VSS 2.6 µA IOZ Total leakage current through the driver/receiver combination, which may include an internal pull-up or pull-down. This value represents the maximum current flowing in or out of the pin while the output driver is disabled, the pull-up or pull-down is inhibited, and the input is swept from VSS to VDD. 6 µA 3.3-V MODE VIH High-level input threshold 2.0 V VIL Low-level input threshold 0.55 V VIHSS Input high-level Steady State(1) 2.2 V VILSS Input low-level Steady State(2) 0.48 V VOH High-level output threshold IOH = 100 µA VDDSHV0 - 0.2 V VOL Low-level output threshold IOL = 100 µA 0.2 V |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
