SC3 datasheet(8/36 Pages) TEKTRONIX

8 / 36 page

Comprehensive power analysis (optional)

Ever increasing consumer demands for longer battery-life devices and for

green solutions that consume less power require power-supply designers to

characterize and minimize switching losses to improve efficiency. In

addition, the supply’s power levels, output purity, and harmonic feedback

into the power line must be characterized to comply with national and

regional power quality standards. Historically, making these and many

other power measurements on an oscilloscope has been a long, manual,

and tedious process. The 3 Series MDO optional power analysis tools

greatly simplify these tasks, enabling quick, repeatable and accurate

analysis of power quality, switching loss, harmonics, safe operating area

(SOA), modulation, ripple, and slew rate (di/dt, dv/dt). Completely

integrated into the oscilloscope, the power analysis tools provide

automated, repeatable power measurements with a touch of a button. The

optional power analysis functionality is offered free for a 30-day trial period.

This free trial period starts automatically when the instrument is powered on

for the first time.

Power Quality measurement table. Automated power measurements enable quick and

accurate analysis of common power parameters.

Unique built-in Spectrum Analyzer (optional)

The Tektronix MDO series is the only oscilloscope to offer an integrated,

hardware-based spectrum analyzer. The spectrum analyzer frequency

range of the 3 Series MDO can be from 9 kHz to 1 GHz or 3 GHz (option 3-

SA1 or 3-SA3), enabling spectral analysis on IoT and most consumer

wireless standards.

Fast and accurate spectral analysis

When using the spectrum analyzer standard N-connector input, the

3 Series MDO display becomes a full-screen Spectrum Analyzer view.

Key spectral parameters such as Center Frequency, Span, Reference

Level, and Resolution Bandwidth are all adjusted quickly and easily using

on-screen touch controls.

3 Series MDO frequency domain display.

Intelligent efficient markers

In a traditional spectrum analyzer, it can be a very tedious task to turn on

and place enough markers to identify all your peaks of interest. The

3 Series MDO makes this process far more efficient by automatically

placing markers on peaks that indicate both the frequency and the

amplitude of each peak. You can adjust the criteria that the oscilloscope

uses to automatically find the peaks.

The highest amplitude peak is referred to as the reference marker and is

shown in red. Marker readouts can be switched between Absolute and

Delta readouts. When Delta is selected, marker readouts show each peak's

delta frequency and delta amplitude from the reference marker.

Two manual cursors are also available for measuring non-peak portions of

the spectrum. When enabled, the reference marker is attached to one of

the cursors, enabling delta measurements from anywhere in the spectrum.

In addition to frequency and amplitude, cursor readouts also include noise

density and phase noise readouts depending on whether Absolute or Delta

readouts are selected. A "Reference Marker to Center" function instantly

moves the frequency indicated by the reference marker to center

frequency.

Automated peak markers identify critical information at a glance. As shown here, the five

highest amplitude peaks that meet the threshold and excursion criteria are automatically

marked along with each peak's frequency and amplitude.

Datasheet

8 www.tek.com

SC3 датащи(PDF) 8 Page - TEKTRONIX, INC.

SC3 датащи(HTML) 8 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

датащи скачать

ссылки URL