** This data sheet is only for models selection. For business, engineering specification by model must be used.

Switching Adapter

4-2

NOV. 2016

Rated

100W

SNP-A10 Series

-Jim-

Output Specifications:

Note:

1. At peak load, the output can last for 10 seconds without shut down.

2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy.

3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

4. Load regulation is defined by changing ±40% of measured output load from 60% rated load.

5. Ripple & noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF + 47uF capacitor at rated load

and nominal line.

6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load

and nominal line.

7. Efficiency is measured at rated load, and nominal line.

8. Model Selection:

SNP-A10x is for both of ITE application and medical application.

MODEL

OUTPUT

LOAD

VOLTAGE

RIPPLE

LINE LOAD EFFICIENCY

NO.

RAIL

MIN RATED MAX. PEAK

ACCURACY

NOISE

REG.

REG.

TYPICAL

SNP-A107

+12V

0A

7.5A

9A +11.40V~+12.60V 100mVpp ±0.5% ±3%

87%

SNP-A108

+15V

0A

6A

7.2A +14.25V~+15.75V 100mVpp ±0.5% ±3%

87%

SNP-A105

+18V

0A

5A

0A +17.1V~+18.9V 100mVpp ±0.5%

3%

87%

SNP-A109

+24V

0A

3.8A

5A +22.80V~+25.20V 100mVpp ±0.5% ±3%

87%

SNP-A10T

+48V

0A

2A

2.4A +45.60V~+50.40V 200mVpp ±0.5% ±3%

87%