No. of

circuits

1

structure reinforced type)

Disconnectable Crimp style Wire-to wire connectors

This is the power supply system drawer

connector which realized excellent

toughness and durability by performing the

secure guide and positioning when mating

with assembled metal pin to the receptacle.

In addition to the ease of robust design of

the connection in equipment, provide

safety and security.

Specifications –––––––––––––––––––

• Current rating: The table below shows the current rating for each

combination of number of circuits and wire.

Note: Notes on branch current in parallel connection.

Do not branch in parallel current which exceeds the rated current

to plurality of circuits. If branched in parallel, current imbalance

or other problems may develop. If it is unavoidable to branch

current in parallel, be sure to control imbalance during applying

current. Design the circuits without causing imbalance and

provide an extra margin for current.

• Voltage rating: 250 V AC, DC

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/ 10 mΩ max.

After environmental tests/ 20 mΩ max.

• Insulation resistance: 500 MΩ min.

• Withstanding voltage: 1,500 VAC/minute

• Applicable wire: Conductor size/ AWG #24 to #14

Insulation O.D. / 1.4 to 3.6 mm

• Mounting method: Screw

* In using the products, refer to "Handling Precaution for Terminal

and Connector" described on our website (Technical documents

of Product information page).

* Contact JST for details.

* RoHS2 Compliance

• Floating amount: ± 0.5 mm

• Space saving design

• High reliability contact

• Using the standard M4 screws to securing board