| поискавой системы для электроныых деталей |
|
LEDRRPFK датащи(PDF) 1 Page - Banner Engineering Corp. |
|
|
|||||||||||||||||||||||||||||
LEDRRPFK датащи(HTML) 1 Page - Banner Engineering Corp. |
|
|
1 / 1 page ![]() Printed in USA 11/04 P/N 108945 rev. B Installing the Polarizing Filter Kit The LEDRRPFK(S) Polarizing Filter Kit provides polarizing filters for both the light sources and PresencePLUS camera. 1. If the ring light is installed on the camera, separate them by removing the two socket head cap screws with the 2.5 mm allen wrench included with the light kit. 2. Remove the four Phillips screws on the ring light’s clear window. Discard the nylon washers, but save the screws for installing the filter and window. 3. Remove the protective plastic covering from both sides of each filter. 4. To ensure correct alignment of the polarizing planes, the ring light filter must be installed with the bump on the top side of the center hole, as shown in Figure 2. The camera filter is shaped to fit in only one direction. 5. Place the polarizing filter in the ring light and place the clear window over it. Secure with the four screws that were removed from the light in step 2. Do not use the nylon washers. 6. The sensor filters install behind the lens. Remove the lens and insert the red filter first, then the polarizing filter. Install the retaining ring, using the tool supplied with the filter kit. NOTE: Take care not to fingerprint the filters. If necessary, carefully clean the filters using only lens or window cleaner. 7. Reinstall the lens. 8. Install the ring light bracket to the top of the camera as described in the ring light literature. Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com Red, Green, or Blue Filter and Polarizing Filter Retainer Ring Retainer Ring Tool Figure 1. Installing the Colored Filter and Polarizing Filter “A” on the Camera Figure 2. Installing the Polarizing Filter “B” on the Ring Light For use with PresencePLUS® and LED..R..W Light Source LEDRRPFK(S) Ring Light Polarizing Filter Kit Model LEDRR80X80W Ring Light shown Polarizing Filter Secure filter and window with four screws removed from clear window Bump (on same side as bracket) |
Аналогичный номер детали - LEDRRPFK |
|
Аналогичное описание - LEDRRPFK |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |