®

LED..B..QPMA Series Backlights

Backlights in 2 sizes for use with PresencePLUS® Sensors – QPMA Connector

Printed in USA

11/04

P/N 119701

Features

See Banner’s web site (www.bannerengineering.com) for a complete lighting

tutorial.

• Continuous or strobed operation

• Solid-state LED matrix, in two sizes

• Two sizes available (see models below)

• Bracket option(s) available for each model

Light Source

LED; see Models table above for wave lengths

Illumination

Diffused for use in applications needing a backlit light source.

Supply Voltage and Current

70x70 mm models: 24V dc @ 250 mA max.

85x220 mm models: 24V dc @ 500 mA max.

Connections

150 mm (6") attached PVC pigtail with 3-wire M12 x 1 male QPMA connector

Construction

Low-carbon steel with black zinc plating, acrylic window

Useful Life

10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%

after 10,000 hours and less than 40% after 20,000 hours.

Operating Conditions

Temperature: 0° to +50°C (+32° to 122°F)

Relative humidity: 90% at 50°C (non-condensing) max.

Cleaning Instructions

Regularly remove any dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not

use any other chemicals for cleaning.

Specifications

Models

LED Color

Wave Length

Active Area

LEDIB70X70QPMA

Infrared

940 nm

71 x 71 mm

(2.8" x 2.8")

LEDRB70X70QPMA

Visible Red

660 nm

LEDIB85X220QPMA

Infrared

940 nm

85 x 220 mm

(3.35" x 8.67")

LEDRB85X220QPMA

Visible Red

660 nm

Models

Pin-Out

����������

�������

����������

�����������

����������

�������