Model No. LMT070DNDFWD

9).Color coordinate tolerance >0.05

3. Each test item applies for a test sample only once, The test sample can not be used again in any

other test item.

4.For Damp Proof Test, Pure water(Resistance＞10MΩ) should be used.

5.In case of malfunction defect caused by ESD damage, if it would be recovered to normal state

after resetting, it would be judge as a good part.

6 In the test of High Temperature Operation and High Temperature & Humidity Operation ,the

operation temperature is the surface temperature of module

7 High Temperature Operation Low Temperature Operation High Temperature Storage Low

Temperature Storage High Temperature & Humidity Operation High Temperature & Humidity

Storage will be increased the test time to 1000hours in the same conditions to test out the ability of

module, and we can not guarantee that the module will not fail during 1000hours.These items test

only once

The information contained herein is the exclusive property of SHENZHEN TOPWAY TECHNOLOGY CO.,LTD.

and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of

SHENZHEN TOPWAY TECHNOLOGY CO.,LTD..

Page 18 of 21