Installing the WLB32 AC Series Lights

Figure 1. Attaching the Snap Brackets (Step 1)

Figure 2. Installing the Cascade Cover (Step 8)

1. Attach the snap brackets to the light.

2. Select a suitable horizontal or vertical dry mounting location.

3. Place the light in the mounting location and mark the positions of the snap bracket mounting holes.

4. Drill the holes and use appropriate screws to secure the snap bracket to the mounting location.

5. Snap the light onto the brackets.

6. When daisy chaining multiple lights, follow steps 1 through 5 to mount additional lights. See the application note in the

mounting locations.

7. Connect the daisy chained units together using cascade cordsets (see

8. Install the supplied cascade cover over the output connector on the last light in the chain.

9. Plug the power cord from the first light into the wall outlet.

CAUTION: To reduce the risk of fire, electric shock, or injury to personnel:

•

Use only insulated staples or plastic ties to secure cords;

•

Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the

wall;

•

Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are

able to be read during relamping;

•

Do not recess into ceilings or soffits; and

•

Do not conceal the cords. The National Electrical Code (NEC) does not permit cords to be concealed

where damage to insulation may go unnoticed. To prevent fire danger, do not run cord behind walls,

ceilings, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually

examined periodically and immediately replaced when any damage is noted.

Specifications

Operating Voltage

90 to 264 V ac (50 or 60 Hz)

Power factor > 0.95 on high setting at 120 V ac

See electrical characteristics on product label

Supply Current

Light Length (mm)

Max Current Draw (A) at 90 V ac

Typical Current Draw (A)

120 V ac

230 V ac

285

0.125

0.075

0.045

570

0.250

0.150

0.080

850

0.375

0.225

0.115

1130

0.500

0.300

0.150

WLB32 Industrial LED Light Bar (AC)

2

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 176314 Rev. J