Procedure

Result

Sensitivity

Setting

Click the "+" and "-" push buttons to

increase or decrease the sensitivity

level. Hold for fast adjustment.

Sensitivity Setting

communicated by bar graph

indicator

Delay Setting

Press and hold the SET push button

for 2 seconds to toggle off-delay

DELAY LED: ON indicating

20 ms off-delay is active

Installation

The sensor can be mounted using the Ø3.5 mm housing holes or the threaded M5 holes with 6 mm max. depth. (Warning:

the use of excessively long screws can damage the product) The connector can be oriented at five different positions by

rotating the block. The position chosen is held by a mechanical blocking system. The rotation can be carried out after

sensor installation as the connector block is completely self contained inside the housing.

Specifications

Supply Voltage and Current

15 to 30 V dc (2 Vpp maximum ripple); 50 mA maximum at 24 V dc

(excluding output current)

Sensing Beam

LED UV, 375 nm; class 1

Sensing Range

QL56M6XD15BQ: 10 to 20 mm (0.39 to 0.79 inches)

QL56M6XD30BQ: 20 to 40 mm (0.79 to 1.57 inches)

QL56M6XD40BQ: 30 to 50 mm (1.18 to 1.97 inches)

Supply Protection Circuitry

Protected against reverse polarity

Ambient Light Rejection

According to EN 60947-5-2

Minimum Spot Dimension

2 × 8 mm at 10 mm (QL56M6XD15BQ)

3 × 11 mm at 24 mm (QL56M6XD30BQ)

4 × 15 mm at 50 mm (QL56M6XD40BQ)

Analog Output

0.75 to 5.5 V dc maximum

Analog Output Impedance

2.2 kΩ (short-circuit protection)

Delay

0 ms (default) or 20 ms user selectable

Output Protection Circuitry

Overload and short circuit protection

Output Configuration

Bipolar (1 NPN and 1 PNP), plus 0.75 to 5.5 V dc analog output

Output Rating

100 mA maximum

Output Response Time

250 µs

Output Saturation Voltage

≤ 2 V

Construction

Aluminum housing, glass lens; mass 180 g maximum

Adjustments

"+" and "-" push buttons determine sensitivity

"Set" push button activates delay and keylock function (see Overview

on page 2)

Connections

Integral 5-pin M12/Euro-style male quick disconnect (QD)

Indicators

Yellow OUTPUT LED: ON indicates output conducting

Green READY LED: ON indicates power on; Flashing indicates output

overload

Orange DELAY LED: ON indicates 20 ms delay activated

Orange KEYLOCK LED: ON indicates push buttons are unlocked

5-segment bar graph: Indicates sensitivity

Switching Frequency

2 kHz

Shock Resistance

30 G; 6 shocks per axis; 11 ms duration (EN60068-2-27)

Vibration

Vibration 10 to 55 Hz 0.5 mm p-p amplitude per IEC60068-2-6

Operating Conditions

Temperature: −10 °C to +55 °C (+14 °F to +131 °F)

Storage Temperature: −20 °C to +70 °C (−4 °F to +158 °F)

Environmental Rating

IEC IP67

Application Notes

The lens must be used in the lower position, and the cap must remain

in place on the end position

Certification

QL56 Series Luminescence Sensor

P/N 142396 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

3