Retroreflective Targets

Banner offers a wide selection of high-quality retroreflective targets. See

www.bannerengineering.com for complete information.

Note: Polarized sensors require corner cube type

retroreflective targets. Non-polarized sensors may use any

retroreflective target.

Brackets

SMB30C

•

30 mm split clamp, black PBT

bracket

•

Stainless steel mounting

hardware included

•

Mounting hole for 30 mm

sensor

66

56

13

A

B

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

SMB30MM

•

12-ga. stainless steel bracket

with curved mounting slots for

versatile orientation

•

Clearance for M6 (¼ in)

hardware

•

Mounting hole for 30 mm

sensor

70

57

A

B

C

57

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30SC

•

Swivel bracket with 30 mm

mounting hole for sensor

•

Black reinforced thermoplastic

polyester

•

Stainless steel mounting and

swivel locking hardware

included

67

58

29

B

A

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven-

modules listed below may be used with all Q45VR2 sensors. Refer to the module's datasheet for more information.

Models

Logic and/or Display Function

45LM58

Programmable output timing logic

45LM58D

Programmable output timing logic plus signal strength display

45LMD

Signal strength display only (no timing function)

Q45VR2 Series Sensors

10

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 36339 Rev. H