1

PL2303GS Product Brochure

V1.0 1/25/19’

Prolific Technology Inc.

7F, #48, Sec.3, Nan-Kang Rd., Taipei, Taiwan 115, ROC

Tel: 886-2-2654-6363

Fax: 886-2-2654-6161

E-mail: sales@prolific.com.tw

http://www.prolific.com.tw

OVERVIEW

The PL2303GS is a low cost and high performance USB-to-Serial Bridge Controller. The PL2303GS

provides a convenient small-factor solution for connecting an RS232-like full-duplex asynchronous serial

device to any USB host. Prolific provides highly compatible drivers that could simulate the traditional COM

port on most operating systems allowing the existing applications based on COM port to easily migrate and

be made USB ready.

By taking advantage of USB bulk transfer mode and large data buffers, PL2303GS is capable of achieving

higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. The

flexible baud rate generator of PL2303GS also could be programmed to generate any rate between 1 bps to

12 Mbps.



FEATURES



Full Compliant with USB Specification v2.0 (Full-Speed)



On-chip USB 1.1 transceiver and 5V to 3.3V regulator



On-chip 96MHz Clock Generator



Supports OTPROM (One-Time Programmable ROM)

for USB device descriptors. OTPROM can be

programmed directly through USB port.



Each IC has unique ID(for Serial Number)



Full-duplex transmitter and receiver

- 5, 6, 7,or 8data bits

- Odd, Even, Mark, Space, or None parity mode

- 1, 1.5,or 2 stop bits

- Parity error, frame error, and serial break detection

- Programmable baud rate from 1bps to 12Mbps

- Independent power source for serial interface

- Works with existing PC COM Port software

applications



1024-byte bi-directional data buffers (768-byte

receive/256-byte transmit).



Package type: SSOP16

PL2303GS

USB to Serial Bridge Controller

BLOCK DIAGRAM