© PHOENIX CONTACT - 01/2006

Data Sheet

INTERFACE

102829_00_en

1

PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany

Phone: +49-(0) 5235-3-00 • Fax: +49-(0) 5235-3-4 12 00 • www.phoenixcontact.com

www.phoenixcontact.com/salesnetwork

OPT-...-DC/230AC/2

Description

The pluggable and solder-in power optocoupler is designed

for use in applications in which electromechanical relays

quickly reach the end of their service life due to the high

switching frequency.

Powerful Optocouplers

In practice, the 6.2 mm PLC optocoupler series with a

maximum switching current of 750 mA is insufficient for

some applications. Users who wish to switch e.g. motors

with a current consumption of up to 2 A, can now insert the

OPT-...-DC/230AC/2 power optocoupler in the correspond-

ing 14 mm wide PLC-... basic terminal blocks (see right).

The optocoupler can also be used on Phoenix Contact

PR1 relay bases and suitable VARIOFACE modules.

Features

–

Wear-resistant switching up to 230 V / 2 A

–

Electrical isolation between input and output 2.5 kV

–

Integrated protective circuit on the output side

–

Sealed IP67 housing for protection against external

influences

–

Resistant to vibrations and shocks

–

Zero voltage switch

Suitable PLC basic terminal blocks for

OPT-24DC/230AC/2

PLC-BSC-24DC/21-21, PLC-BSC-48DC/21-21,

PLC-BSC-24DC/1-1/ACT, PLC-BSC-24DC/1IC/ACT,

PLC-BSC-24DC/21HC, PLC-BSC-48DC/21HC,

PLC-BSP-24DC/21-21, PLC-BSP-48 DC/21-21,

PLC-BSP-24DC/1IC4ACT, PLC-BSP-24DC/21HC,

PLC-BSP-48DC/21HC

Suitable PLC basic terminal blocks for

OPT-60DC/230AC/2

PLC-BSC-60DC/21-21, PLC-BSC-60DC/21HC,

PLC-BSP-60DC/21-21, PLC-BSP-60DC/21HC

.

Make sure you always use the latest documentation.

It can be downloaded at www.download.phoenixcontact.com.

A conversion table is available on the Internet at

www.download.phoenixcontact.com/general/7000_en_00.pdf.

This data sheet is valid for all products listed on the following page:

Power Optocouplers for Switching AC Loads

up to 2 A