Sales Information

Phone:(425) 353-3010

Fax: (425) 353-4030

SVRME28

– 8.0

E-mail: vptsales@vptpower.com

Web: www.vptpower.com

Page 7

SVRME28 Series

6.0 STANDARD MICROCIRCUIT DRAWING (SMD) NUMBERS

DLA Drawing

Number

SVRME Series

Similar Part Number

13009-01HXC

13009-01HXA

13009-01HYC

13009-01HYA

13009-01KXC

13009-01KXA

13009-01KYC

13009-01KYA

SVRME28/H+

SVRME28/H+-E

SVRME28F/H+

SVRME28F/H+-E

SVRME28/K

SVRME28/K-E

SVRME28F/K

SVRME28F/K-E

Do not use the SVRME28 Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications

for the SMD product, refer to the SMD drawing. SMDs can be downloaded from the DLA Land and Maritime (Previously known as

DSCC) website at https://landandmaritimeapps.dla.mil/programs/defaultapps.asp. The SMD number listed above represents the

Federal Stock Class, Device Type, Device Class Designator, Case Outline, Lead Finish and RHA Designator (where applicable).

Please reference the SMD for other screening levels, lead finishes, and radiation levels. All SMD products are marked with a

“Q” on the

cover as specified by the QML certification mark requirement of MIL-PRF-38534.

7.0 ORDERING INFORMATION

SVRME

28

F

/K

-

XXX

1

2

3

4

5

(1)

Product

Series

(2)

Nominal Input

Voltage

(3)

Package Option

(4)

(5)

Additional

Screening

Code

SVRME

28

28 Volts

(None)

F

Standard

Side-

Flanged

/EM

/H+

/K

Engineering Model

Class H + PIND

Class K

Contact Sales

1

Contact the VPT Sales Department for availability of Class H (/H) or Class K (/K) qualified products

2

VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer

contract.

3

Engineering models utilize only the standard screening specified and are not considered compliant for flight use. These models are intended for low volume engineering

characterization. The customer must place the following statement on each line item of their purchase order(s) for /EM units when ordering engineering models:

“(Customer Name) acknowledges that the /EM unit listed in this line item is not permitted for flight use and will be used for engineering characterization only.”

Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental

screening and testing, different input voltage, output voltage, power requirements, source inspection, and/or special element evaluation

for space or other higher quality applications.