Designed to meet the high-current requirements in industrial and

consumer applications; embedded core, memory, or logic supplies; TVs,

VCRs, and office equipment, the SI-3003KWM voltage regulator offers

the reduced dropout voltage and low quiescent current essential for

improved efficiency. This device delivers dual regulated outputs at up to

1 A. Integrated thermal and overcurrent protection enhance overall

system reliability. Devices with other output voltages are also available.

Quiescent current does not increase significantly as the dropout

voltage is approached, an ideal feature in standby/resume power systems

where data integrity is crucial. Regulator accuracy and excellent

temperature characteristics are provided by a bandgap reference. An

LS-TTL/CMOS-compatible input gives the designer complete control

over power up, standby, or power down. A pnp pass element provides a

dropout voltage of less than 600 mV at 1 A of load current. Low output

voltages eliminate the need for expensive PWM buck converters. The

low dropout voltage permits more efficient regulation before output

regulation is lost.

This device is supplied in a 5-lead TO-252 style surface-mount

plastic package with ground tab to provide a low-resistance path for

maximum heat dissipation. A similar device in a flange-mounted (TO-

220-style) high-power package is the SI-3003KWD.

FEATURES

■ 1 A Output Current per Channel

■ 0.6 V Maximum Dropout Voltage at I

■ Fast Transient Response

■ 1.5 mA Maximum Standby Current

■ Foldback Current Limiting

■ Ground Tab for Superior Heat Dissipation

■ Thermal Protection

APPLICATIONS

■ TVs, VCRs, Electronic Games

■ Embedded Core, Memory, or Logic Supplies

■ Printers and Other Office Equipment

■ Industrial Machinery

■ Secondary-Side Stabilization of Multi-Output SMPS

1 A, Low-Dropout, Dual Output, 1.8 V & 2.5 V Regulator

Always order by complete part number, e.g., SI-3003KWM-TL ,

where “-TL” indicates tape and reel.

ABSOLUTE MAXIMUM RATINGS

Input Voltage, V

18 V

Output Current, I

1 A*

Enable Input Voltage, V

6.0 V

Junction Temperature, T

+125°C

Storage Temperature Range,

T

-40°C to +125°C

* Output current rating is limited by input

voltage, duty cycle, and ambient tempera-

ture. Under any set of conditions, do not

exceed a junction temperature of +125°C.

SI-3003KWM

Sanken Power Devices

from Allegro MicroSystems

Linear

Regulators