Fully Automatic Dicing Saw

DFD6363

Operation flow

performed at the pre-alignment stage. The lower arm moves the

workpiece to the chuck table.

and drying

→

• Use clean, oil-free air at a dew point of -10 – -20°C or less (Residual oil: 0.1 ppm. Filtration rating: 0.01 µm / 99.5 % or more).

• Keep room temperature within ±1°C of the specified value. (Specified value should be between 20 – 25°C.)

• Keep cutting water 2°C above room temperature (fluctuations within 1°C).

• Machines should be used in an environment free from external vibration. Do not install machines near a ventilation opening, heat generating equipment, or oil mist generating parts.

• This machine uses water. Due to the risk of water leakage, please install the machine on a floor with sufficient waterproofing and drainage measures.

*All the pressures are described using gauge pressure.

*The above specifications may change due to technical modifications. Please confirm when placing your order.

*For further information please contact your local sales representatives.

2018.12

プリアライメントステージ

スピンナテーブル

ロアアーム

アッパーアーム

門型構造

チャック

テーブル

カセット

エレベータ

www.disco.co.jp

Specification

Unit

1.8 kW, High-speed rotation

2.2 kW

Max. workpiece size

-

ø300

X-axis

Cutting range

mm

310

Cutting speed

mm/s

0.1

– 1,000

Y-axis

Cutting range

mm

310

Index step

mm

0.0001

Index positioning

accuracy

mm

0.002/310

(Single error) 0.002/5

Z-axis

Max. stroke

Mm

14.7

(For ø2” blade)

14.9

(For ø3” blade)

Moving resolution

mm

0.0000002

Repeatability

accuracy

mm

0.001

θ-axis

Max. rotation angle

deg

380

Spindle

Rated torque

N・m

0.29 (1.8 kW)

0.19 (High-speed rotation)

0.7

Revolution speed

range

6,000

– 60,000 (1.8kW)

20,000

– 80,000

(High-speed rotation)

3,000

– 30,000

Machine

dimensions

( W x D x H )

mm

1,200 x 1,550 x 1,800

Machine weight

kg

Approx. 1,800

Specifications