RFM119W/RFM119SW

Rev 1.0 | Page 10 /19

www.hoperf.com

W

E-mail:sales@hoperf.com

when the frequency is larger than 480 MHz. See the table below for the modulation, frequency and symbol rate specifications.

Table 9. Modulation, Frequency and Symbol Rate

Parameter

Value

Unit

Modulation

(G)FSK/OOK

-

Frequency

240 to 960

MHz

Deviation

1 to 200

kHz

198

Hz

397

Hz

Symbol Rate (FSK/GFSK)

0.5 to 100

ksps

Symbol Rate (OOK)

0.5 to 30

ksps

5.3 Embedded EEPROM and RFPDK

The RFPDK (RF Products Development Kit) is a very user-friendly software tool delivered for the user configuring the

RFM119W/RFM119SW in the most intuitional way. The user only needs to fill in/select the proper value of each parameter

and click the “Burn” button to complete the chip configuration. See the figure below for the accessing of the EEPROM and

Table 10 for the

summary of all the configurable parameters of the RFM119W/RFM119SW in the RFPDK.

RFM119W/S

RFPDK

EEPROM

Interface

CLK

DATA

HOPERF USB

Programmer

Figure 12. Accessing Embedded EEPROM

For more details of the HOPERF USB Programmer and the RFPDK, please refer to “AN103 CMT211xA-221xA One-Way RF

Link Development Kits Users Guide”. For the detail of RFM119W/RFM119SW configurations with the RFPDK, please refer to

“AN122

CMT2113/19A Configuration Guideline”.