175-4591 datasheet(35/54 Pages) ETC2

35 / 54 page

Tip

Style

Shank

Descrip-

Spacing

Socket

Taper

tion*

Range

Taper

(inches)

4RW

TT-1408

1-1/4 to 2 4RW 5RW 4CT 5CT

LIGHT

4RW

TT-1416

2 to 4

4RW 5RW 4CT 5CT

Duty

5RW

TT-1508

1-1/2 to 2 4RW 5RW 4CT 5CT

5RW

TT-1516

2 to 4

4RW 5RW 4CT 5CT

5RW

TT-15516

2 to 4

4RW 5RW 4CT 5CT

5RW

TT-15524

4 to 6

4RW 5RW 4CT 5CT

HEAVY

6RW

TT-15616

2 to 4

4RW 5RW 4CT 5CT

Duty

6RW

TT-15624

4 to 6

4RW 5RW 4CT 5CT

7RW

TT-15716

2 to 4

4RW 5RW 4CT 5CT

7RW

TT-15724

4 to 6

4RW 5RW 4CT 5CT

QUICKEST WAY TO CUT WELDING COSTS

Increased productivity without capital investment or increased labor costs just has to spell PROFIT. Hundreds of

resistance welding users are profiting from the TUFFALOY methods of multiple welding, to produce almost any assembly

requiring closely spaced welds.

The key is to “think multiple!” Whenever the welding machine goes through a cycle, have it do more than one weld at

a time. It’s easy and practical with one of the TUFFALOY multiple welding devices: The Teeter-Tip dual tip adapter, the

Equatip dual tip holder, the Equa-Press dual tip holder, or the Tri-Spacer.

They’re ready to go to work, cutting costs and increasing production efficiency for you.

Study the multiple welding holders and adapters in this section. Learn their capabilities, “think multiple,” and you’ll

probably see many ways in which TUFFALOY multiple welding can improve your operation. Remember that TUFFALOY

is prepared to provide any special fixturing you need. Show our engineers what you require, and they’ll design a set-up

to do it.

*When ordering, also state exact tip spacing and tip

socket size, Example: TT - 1508 - 1-1/2 - 5CT. (5CT means

5/8” diameter cap, 4CT means 1/2” diameter cap.)

TEETER-TIP DUAL TIP ADAPTERS

U.S. Pat. 3,356,821

You can spot or projection weld in half the time by doubling the number of welds

per machine stroke. Use Teeter-Tip dual tip adapters, which come with water-

coolant fittings to beat high heat build-up. These, adapters transmit total pressures

of 1000 lbs., and deliver equal current and pressure to each tip. They compensate

for normal electrode wear, imperfect tip dressing, and work variations up to .060”.

LIGHT-DUTY adapters have no. 4 or 5 RW shanks, tip spacing to 4 inches, tip

sockets for 1/2” or 5/8” diameter male Tuffcap caps, or 4 RW tips (5/8” cap

sockets are standard).

HEAVY-DUTY adapters have shanks from 5 to 7 RW size, tip spacing to

6 inches, tip sockets for 1/2” or 5/8” diameter male Tuffcap caps, or

4 or 5 RW tips (4 RW sockets are standard). These adapters have a

deeper, stronger body.

Two low-height 5/8” dia. cap-type tips are shown below. They are

recommended for use in these adapters. Other standard caps, both

5/8” & 1/2” dia., are tabled on the next page. You must specify the

size tip sockets you want, or the standard socket will be supplied.

TRUNCATED CONE SE-6332

(Part No. 186-0522)

FLAT FACED SE-6296

(Part No. 186-0523)

LIGHT DUTY

HEAVY DUTY

TUFFALOY

multiple welding

175-4591 датащи(PDF) 35 Page - List of Unclassifed Manufacturers

175-4591 датащи(HTML) 35 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

датащи скачать

ссылки URL