FS8855

Rev. 2.7

13/14

Ver.

Date

Page

Description

Circuit.

1.3

2004/03/16

4

Absolute Maximum Ratings : Remove Operating ambient

temperature range.

1.3

2004/03/16

5

Electrical Characteristics : Add Symbol column.

1.3

2004/03/16

6

Typical Operating Characteristics : Change all labels

"TEMPERATURE" to "AMBIENT TEMPERATURE". Current

header "Ron vs. LOAD CURRENT"

1.3

2004/03/16

9/10

Detail Description : Correct wording.

1.3

2004/03/16

11

Change Package Information to Package Outline

1.3

2004/03/16

11/12

/13

Package Outline : Update SOT-223/SOT-89/TO-92 package

diagrams.

1.3

2004/03/16

All

Update page header and footer to standard format. Update

page layout and style to standard format.

1.4

2004/05/11

1

Ordering Information: Add Pb/P free package option

1.4

2004/05/11

2

Package Marking Information: Add Pb/P free package marking

information

1.4

2004/05/11

4

Absolute Maximum Rating: Change continuous power

dissipation values and add notes. Add maximum junction

temperature +155°C.

1.4

2004/05/11

5

Electrical

Characteristics:

Change

thermal

shutdown

temperature from 170°C to 155°C.

1.4

2004/05/11

5

Electrical Characteristics: Change thermal resistance of

SOT-223 from 80 to 155. Change thermal resistance of

SOT-89 from 150 to 180. Change thermal resistance of TO-92

from 220 to 180.

1.4

2004/05/11

10

Operating Region and Power Dissipation: Change the result of

power dissipation calculation example for SOT-89. The

calculated value is based on new thermal resistance and

recommended operating temperature range.

2.0

2005/08/26

All

Update header/footer with new format.

2.0

2005/08/26

1

General Description: Update output voltages from “1.3V~4.5V”

to “1.5V~5.0V”. Remove SOT-223 package.

2.0

2005/08/26

1

Features: Update output voltages from “1.3V~4.5V” to

“1.5V~5.0V”. Add “Quiescent current 30μA at 5V input.”

2.0

2005/08/26

1

Ordering Information: Delete D,F,W,G,H,J,X pin-out types.

Update output voltages from “1.3V~4.5V” to “1.5V~5.0V”.

2.0

2005/08/26

2

Pin Configurations: Delete D,F,W,G,H,J,X pin-out types.

2.0

2005/08/26

2

Pin description: Delete D,F,W,G,H,J,X pin-out types. Move pin

descriptions into table.

2.0

2005/08/26

3

Typical Application Circuit: Update pin-out and connection

diagram.

2.0

2005/08/26

4

Electrical Characteristics:

Remove output voltage spec.

Add the output voltage accuracy spec. for 3.5<VOUT 5.0

≦

range to +/-1% at 7V input, and +/- 1.5% at 9V input

Change the dropout voltage spec. at 1mA from “Typ 1.0mA

Max 1.2mA” to “Typ 1.1mA Max 1.3mA”.

Change the dropout voltage spec. at 100mA from “Typ 100mA

Max 120mA” to “Typ 120mA Max 145mA”.

Change the ground pin current spec. form “Typ 65μA Max

120μA” to “Typ 30uA Max 50μA”.

Change the test condition for previous two spec. to Vin=5.0V.

Change PSRR spec. form “75dB @ 10KHz” to “70dB @ 1KHz”

Change thermal shutdown hysteresis spec. from 20 to 10.

2.0

2005/08/26

8

Detail Description: Update output voltages from “1.3V~4.5V” to

“1.5V~5.0V”. Update quiescent current form “65μA” to “30μA”.

2.0

2005/08/26

10

Package Outline: Remove SOT-223 package information.

2.1

2006/09/27

All

Revise datasheet format

2.2

2009/08/05

3

Ordering Information: