| поискавой системы для электроныых деталей |
|
MSM6789 датащи(PDF) 18 Page - OKI electronic componets |
|
|
|||||||||||||||||||||||||||||
MSM6789 датащи(HTML) 18 Page - OKI electronic componets |
|
18 / 53 page ![]() MSM6789A/6789L ¡ Semiconductor PIN DESCRIPTIONS (for MSM6789L (3.3 V Version)) (Continued) Symbol Type Description BRO BR1 I Bit Rate Selection. This pin selects one of the following three types of bit rate (master clock frequency fOSC = 8.192 MHz). This pin is invalid during the ROM playback operation. PDMD*1 I Transition to the Power-down State. VD0-VD3 I These pins set the voice detect level for the voice triggered starting and unvoiced-part elimination. This pin selects the voice triggered starting or the unvoiced-part elimination. VDS I BR1 BR0 Bit rate L L 16.0 kbps L H H H L H 12.6 kbps 10.0 kbps Unused Low level: The MSM6789L automatically goes to the power-down state, except when the record/playback operation is performed. High level: The MSM6789L automatically goes to the standby state, instead of the power-down state, except when the record/playback operation is performed. In this case, the MSM6789L can be placed in the power-down state by setting the RESET or PDWN pin to a high level. If an external circuit is used for the built-in LPF, this standby mode must be selected by applying a high level to the PDMD pin. This pin outputs a high level while the record/playback operation is being performed. Output to indicate the enable or disable state of the operation for specifying a phrase. When continuous ROM playback is performed, the next phrase can be specified after the NAR pin goes to high positively. MON O NAR O Pin 35 36 33 67-70 38 72 71 Voice triggered starting: Note: When neither the voice triggered starting nor the unvoiced-part elimination is used, input a Low level to VD0 to VD3. Input a High level to the VDS pin. Then set the voice detect level with VD0 to VD3 pins. Unvoiced-part elimination:Input a Low level to the VDS pin. Then set the voice detect level with VD0 to VD3 pins. *1 When DRAM is selected, be sure to set the PDMD pin to a High level. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |