ST100 Starterkit

Product Information

Features



16Bit Radar Data Acquisition System



Displays and Logs Doppler Signals



2 Channel Acquisition (I and Q Signals)



View in Frequency and Time Domain



Realtime Logfile Playback to Screen



Realtime Playback to Sensor System



Works with all RFbeam Radar Modules



Multifunctional Hard- and Software Bundle



Contains an RFbeam K-LC1 Radar Module

Applications



Evaluation and Optimisation of Short Range Radar Front-Ends



On-Site Analysis of Real Signals



Data Logging



Playback of Real Signals into Sensor Systems



Getting Doppler Radar Experience with "Learning by Doing"

Description

RFbeam ST100 Starterkit consists of a PCB

motherboard, a K-LC1 radar module and a

flexible acquisition software. ST100 hardware

serves as "USB soundsystem" without the

need of installing driver software. The system

works with native radar modules as well as

with modules containing IF amplifiers. Hard-

ware is prepared for use with FMCW and FSK

software, that will be available as separate

software by RFbeam.

X1 High Gain Input

For native radar modules without integrated IF

X2 Low Gain Input

For radar modules with integrated IF amplifier

X3 Direct IF Input

For modules with integrated high gain IF amplifier

X4 9VDC (optional)

If ST100 is used without USB

X5 USB-1 Interface

For use with RFbeam SignalViewer

X6 Signal Testpoints

Connect multimeters and oscilloscope to view raw

signals.

Contains also analog outputs to playback recorded

radar waveforms.

Sel Input Selector

Signals to be sent to RFbeam SignalViewer Software

ST100 Starterkit with RFbeam K-LC1 plugged into X1 connector

© 2008-2014 RFbeam Microwave GmbH www.rfbeam.ch

Page 1/2

X2

X1

X3

X5

X4

X6

Sel