K-MC1_LP RADAR TRANSCEIVER

Datasheet

Antenna System Diagram

This diagram shows module sensitivity in both azimuth and elevation directions. It combines

transmitter and receiver antenna characteristics.

Fig. 2: Anntenna system diagram

Pin Configuration

Pin

Description

Typical Value

1

nc

2

VCC

3.3V..5V supply

3

GND

0V supply

4

IF output Q

5

IF output I

6

nc

7

nc

8

nc

Outline Dimensions

Mounting instruction

Mount from back side using thread

marked with B:

M2.5 screws, screw depth < 3.5mm

Keep out zone C (tuning srcew)

K-MC1_LP modules must not be

used without screws in A.

Fig. 3: Mechanical dimensionsApplication Notes

© RFbeam Microwave GmbH, Schuppisstrasse 7, CH-9016 St. Gallen

Page 3/5