BMP280 datasheet(45/49 Pages) BOSCH

45 / 49 page

Datasheet

BMP280 Digital Pressure Sensor

Page 45

BST-BMP280-DS001-19 | Revision 1.19 | January 2018

Bosch Sensortec

parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice. Not intended for publication.

The variable t_fine (signed 32 bit) carries a fine resolution temperature value over to the pressure

compensation formula and could be implemented as a global variable.

The data type “BMP280_S32_t” should define a 32 bit signed integer variable type and could

usually be defined as “long signed int”. The revision of the code is rev.1.1.

// Returns temperature in DegC, double precision. Output value of “51.23” equals 51.23 DegC.

// t_fine carries fine temperature as global value

BMP280_S32_t t_fine;

double bmp280_compensate_T_double(BMP280_S32_t adc_T)

{

double var1, var2, T;

var1

= (((double)adc_T)/16384.0 – ((double)dig_T1)/1024.0) * ((double)dig_T2);

var2

= ((((double)adc_T)/131072.0 – ((double)dig_T1)/8192.0) *

(((double)adc_T)/131072.0 – ((double) dig_T1)/8192.0)) * ((double)dig_T3);

t_fine = (BMP280_S32_t)(var1 + var2);

= (var1 + var2) / 5120.0;

return T;

}

// Returns pressure in Pa as double. Output value of “96386.2” equals 96386.2 Pa = 963.862 hPa

double bmp280_compensate_P_double(BMP280_S32_t adc_P)

{

double var1, var2, p;

var1 = ((double)t_fine/2.0) – 64000.0;

var2 = var1 * var1 * ((double)dig_P6) / 32768.0;

var2 = var2 + var1 * ((double)dig_P5) * 2.0;

var2 = (var2/4.0)+(((double)dig_P4) * 65536.0);

var1 = (((double)dig_P3) * var1 * var1 / 524288.0 + ((double)dig_P2) * var1) / 524288.0;

var1 = (1.0 + var1 / 32768.0)*((double)dig_P1);

if (var1 == 0.0)

{

return 0; // avoid exception caused by division by zero

}

p = 1048576.0 – (double)adc_P;

p = (p – (var2 / 4096.0)) * 6250.0 / var1;

var1 = ((double)dig_P9) * p * p / 2147483648.0;

var2 = p * ((double)dig_P8) / 32768.0;

p = p + (var1 + var2 + ((double)dig_P7)) / 16.0;

return p;

}

8.2 Compensation formula in 32 bit fixed point

Please note that it is strongly advised to use the API available from Bosch Sensortec to perform

readout and compensation. If this is not wanted, the code below can be applied at the user’s risk.

Both pressure and temperature values are expected to be received in 20 bit format, positive,

stored in a 32 bit signed integer.

The variable t_fine (signed 32 bit) carries a fine resolution temperature value over to the pressure

compensation formula and could be implemented as a global variable.

The data type “BMP280_S32_t” should define a 32 bit signed integer variable type and can

usually be defined as “long signed int”.

The data type “BMP280_U32_t” should define a 32 bit unsigned integer variable type and can

usually be defined as “long unsigned int”.

Compensating the pressure value with 32 bit integer has an accuracy of typically 1 Pa (1-sigma).

At very high filter levels this adds a noticeable amount of noise to the output values and reduces

their resolution.

// Returns temperature in DegC, resolution is 0.01 DegC. Output value of “5123” equals 51.23 DegC.

// t_fine carries fine temperature as global value

BMP280_S32_t t_fine;

BMP280_S32_t bmp280_compensate_T_int32(BMP280_S32_t adc_T)

{

BMP280 датащи(PDF) 45 Page - Bosch Sensortec GmbH

BMP280 датащи(HTML) 45 Page - Bosch Sensortec GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

датащи скачать

ссылки URL