128

DeviceNet Wireless Units

WD30

Ordering Information

● Peripheral Devices (Micro Connectors)

● Peripheral Devices

Note: For details on peripheral devices, refer to this catalog.

* The price depends on the license.

Specifications

● General Specifications

* Select a power supply with excess capacity. (We recommend a minimum of 25 W.)

● Wireless Interface Specifications

* Depends on many factors in the installation environment.

● DeviceNet Interface Specifications (Summary)

* FINS message communications are not supported. Explicit messages must be

handled in the ladder program. Refer to the WD30 DeviceNet Wireless Units

Operation Manual for details.

● Compliance with China Radio Standards

In China, radio frequency channel 51 cannot be used. Use channels 2

to 34 or channels 52 to 83. Also, use is prohibited on or near aircraft.

● Certified Standards

● Compliance with UL Standards

Use a class 2 power supply for compliance with UL standards.

Main class 2 power supply: OMRON S8VS (30 W or 60 W)

Switching Power Supply

Dimensions

(Unit: mm)

● WD30 DeviceNet Wireless Unit

* With the WD30-AT001, only the WD-ME/SE or WD30-ME01/SE01 can be used.

Type

Number of I/O

(number of allocated words)

Antenna type

Model

DeviceNet Wireless Master

1,600 inputs max. (100 words)

1,600 outputs max. (100 words)

Pencil-type antenna

WD30-ME

Magnetic base antenna

WD30-ME01

DeviceNet Wireless Slave

512 inputs max. (32 words)

512 outputs max. (32 words)

Pencil-type antenna

WD30-SE

Magnetic base antenna

WD30-SE01

Magnetic base antenna (one)

--

--

WD30-AT001

*

● Enclosed Accessories

The following accessories are included with

a Wireless Master or Wireless Slave.

• Two Antennas

• Instruction Sheet

• Declaration of CE marking certification

• Two M4 screws (with nuts, flat washers,

and spring washers)

Name

Specifications

Model

Shielded T-branch

Connector

Connector with one

branch

Screws

DCN2-1

Smart Click

DCN2-1S

Cable with

Shielded

Connectors

Cables with connectors on

both ends

Screws

DCA1-5CN

@@W1

Smart Click

DCA1-5CS

@@W1

Cables with connector

socket on one end

Screws

DCA1-5CN

@@F1

Smart Click

DCA1-5CS

@@F1

Shielded

Terminator

Plug Connector

Screws

DRS2-1

Smart Click

DRS2-1S

Name

Model

Configurator (PC Card)

3G8E2-DRM21-V1

Configurator Software

WS02-CFDC1-E

FA Integrated Tool Package

CXONE-AL

@@C-E

Item

Specifications

DeviceNet communications

power supply voltage

11 to 25 VDC

(supplied from the communications connector)

Current consumption

*

4 W (350 mA max. (startup), average: 120 mA)

Ambient operating temperature

-10°C to 50°C

Ambient operating humidity

25% to 85% (with no condensation)

Ambient storage temperature

-20°C to 65°C

Vibration resistance

acceleration with 10 sweeps in X, Y and Z directions

for 8 minutes each

Shock resistance

Weight

Approx. 200 g

Item

Specifications

Wave type

Spread Spectrum (direct sequence; DS-SS)

Communications method

Simplex (half duplex)

Frequency band

2.4 GHz (2401 MHz to 2480.2 MHz)

Number of channels

66 channels

Antenna power

10 mW

Data transfer speed between

wireless units

100 kbps

Transmission distance

*

Indoors:

60 m (approx. 50 m with magnetic base

antennas)

Outdoors: 300 m (unobstructed)

Relay stations

3 repeaters max.

Max. number of sets in the same

area

*

10 sets max.

Max. number of wireless Slaves

64 max.

Item

Specifications

Communications

functions

*

Master/Slave

connections

Remote I/O functions, Explicit message

communications

Self-diagnostic

functions

Unit

WDT error, hardware errors (such as memory

and CAN errors), and setting errors

DeviceNet

communications

Duplicate node address errors, Bus OFF

detection, and connection timeout

Device profiles

Communication

control unit

Refer to Appendix A of the WD30 DeviceNet

Wireless Units Operation Manual for various

DeviceNet IDs (vendor, device type =

communication adapter, product code, product

revision, product name, serial number, status,

and I/O unit IDs.)

Approved radio

standards

Japanese radio standards

ARIB STD-T66

U.S. radio standards

FCC part15.247

Canadian radio standards

IC RSS 210

Chinese radio standards

信部無

［2002］353号

Compliant radio

standards

EU radio standards

EN 300 440-2

Approved standards

Safety standards

cULus Listing: UL508/CSA C22.2

No.142

Compliant standards

Safety standards

EN 60950-1

EMC standards

EN 301 489-17

● DeviceNet Wireless Units

WD30-ME

WD30-SE

● DeviceNet Wireless Units

WD30-ME01

WD30-SE01

● Magnetic Base Antenna (1 Antenna)

WD30-AT001

(Included with the WD30-ME01 and WD30-SE01.)

Refer to the WD30 DeviceNet Wireless Units Datasheet (Cat. No. M502, M503) or

WD30 DeviceNet Wireless Units Operation Manual (Cat. No. M071) for more detailed specifications.

39

13.3

115

94

20

10.5

3.8 dia.

35.8 dia.

(Cable length: 2,000)

MS

WD30--ME

V1

WIRELESS UNIT

NS

No.

35

16

59.5

13

159

85

74

62

80

MS

WD30--ME

V1

WIRELESS UNIT

NS WS

No.

59.5

13

85

80

35