For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

12

12 - 170

Evaluation PCB

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have

50 ohm impedance while the package ground leads and backside ground paddle should be connected directly

to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top

and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation

circuit board shown is available from Hittite upon request.

HMC535LP4 / 535LP4E

v01.1009

PHASE-LOCKED OSCILLATOR,

14.7 - 15.4 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D