FSUSB40 datasheet(2/12 Pages) ONSEMI

2 / 12 page

March 2013

www.fairchildsemi.com

FSUSB40 • Rev. 1.0.8

FSUSB40

— Low-Power, Two-Port, Hi-Speed,

USB2.0 (480Mbps) Switch

Features

 Low On Capacitance: 5.9pF Typical

 Low On Resistance: 3.9Ω Typical

 Low Power Consumption: 1μA Maximum

- 15μA Maximum ICCT over an Expanded Voltage

Range (VIN=1.8V, VCC=4.3V)

 Wide -3db Bandwidth: > 720MHz

 Packaged in:

- 10-Lead MicroPak™ (1.6 x 2.1mm)

- 10-Lead UMLP (1.4 x 1.8mm)

 8kV ESD Rating, >16kV Power/GND ESD Rating

 Power-Off Protection on All Ports When V

CC=0V

- D+/D- Pins Tolerate up to 5.25V

 Over-Voltage Tolerance (OVT) on all USB Ports

Up to 5.25V without External Components

Applications

 Cell phone, PDA, Digital Camera, and Notebook

 LCD Monitor, TV, and Set-Top Box

IMPORTANT NOTE:

For additional performance information, please contact

analogswitch@fairchildsemi.com.

Description

The FSUSB40 is a bi-directional, low-power, two-port,

Hi-Speed, USB2.0 switch. Configured as a double-pole,

double-throw switch (DPDT) switch, it is optimized for

switching between two Hi-Speed (480Mbps) sources or

a Hi-Speed and Full-Speed (12Mbps) source.

The FSUSB40 is compatible with the requirements of

USB2.0 and features an extremely low on capacitance

(CON) of 5.9pF. The wide bandwidth of this device

(720MHz) exceeds the bandwidth needed to pass the

third harmonic, resulting in signals with minimum edge

and

phase

distortion.

Superior

channel-to-channel

crosstalk also minimizes interference.

The FSUSB40 contains special circuitry on the switch

I/O pins for applications where the VCC supply is

powered-off (VCC=0), which allows the device to

withstand an over-voltage condition. This device is

designed to minimize current consumption even when

the control voltage applied to the SEL pin is lower than

the supply voltage (VCC). This feature is especially

valuable to ultra-portable applications, such as cell

phones, allowing for direct interface with the general-

purpose

I/Os

the

baseband

processor.

Other

applications include switching and connector sharing in

portable cell phones, PDAs, digital cameras, printers,

and notebook computers.

Ordering Information

Part Number

Top Mark

Operating

Temperature Range

Eco Status

Package

FSUSB40L10X

-40 to +85°C

RoHS

10-

Lead MicroPak™ 1.6 x 2.1mm,

JEDEC MO-255B

FSUSB40UMX

-40 to +85°C

Green

10-Lead, Quad, Ultrathin Molded

Leadless Package (UMLP), 1.4 x 1.8mm

MicroPak™ is a trademark of Fairchild Semiconductor Corporation.

For F

airchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.

FSUSB40 датащи(PDF) 2 Page - ON Semiconductor

FSUSB40 датащи(HTML) 2 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

датащи скачать

ссылки URL