M41T62/63/64/65

24/33

MAXIMUM RATING

Stressing the device above the rating listed in the

“Absolute Maximum Ratings” table may cause

permanent damage to the device. These are

stress ratings only and operation of the device at

these or any other conditions above those indicat-

ed in the Operating sections of this specification is

not implied. Exposure to Absolute Maximum Rat-

ing conditions for extended periods may affect de-

vice

reliability.

Refer

also

to

the

STMicroelectronics SURE Program and other rel-

evant quality documents.

Table 11. Absolute Maximum Ratings

Note: 1. Test conforms to JEDEC standard.

2. Data based on characterization results, not tested in production.

3. Reflow at peak temperature of 260°C (total thermal budget not to exceed 245°C for greater than 30 seconds).

Sym

Parameter

Unit

–55 to 125

°C

Supply Voltage

–0.3 to 4.6

V

(3)

Lead Solder Temperature for 10 Seconds

260

°C

Input or Output Voltages

–0.2 to Vcc+0.3

V

Output Current

20

mA

Power Dissipation

1

W

Electro-static discharge voltage (Human Body Model)

>1000

V

Electro-static discharge voltage (Robotic Charged Device

Model)

>1000

V