WFS3-40P415 | WFS

FORK SENSORS

Connection diagram

cd-092

+ (L+)

Teach

- (M)

BN

WH

BU

1

2

3

Q

BK

4

Concept of operation

Press “–” button, teach-in

process is finished.

2. Move multiple labels

through the fork sensor

Notes

Teach-in (static): Setting the switching threshold without movements of label, cf. operating instruction.

Press both the “+” and “–”

buttons together, hold > 1 s and

than release the teach-in buttons.

The red LED flashes.

1. Position label or substrate

in the active area of the

fork sensor

Once teach-in process is complete, the switching threshold can be adjusted at any time using

the “+” or “–” button. To make minor adjustments, press the “+” or “–” button once.

To configure settings quickly, keep the “+” or “–” button pressed for longer.

Switching threshold adaptation:

Only, the first teach-in procedure after switching on is permanently stored. Teach-in can be repeated

cyclically. Switching output also during teach-in active.

Press both the “+” and “–” buttons together (3 seconds) to lock the device and prevent

unintentional actuation.

Press both the “+” and “–” buttons together (6 seconds) to define the switching function

(light/dark switching). Standard setting: Q = light switching.

2018-07-08 09:57:24 | Online data sheet

Subject to change without notice

REGISTRATION SENSORS | SICK

5