PSI-DATA/FAX-MODEM/RS232

100500_en_01

PHOENIX CONTACT

4

LED indicator/data indicator

Green LED (OH), off the hook

Yellow LED (AA), automatic answer, flashes during selective call acceptance

Yellow LED (FAX), fax mode active

Yellow LED (EC), error correction in V.42 mode, flashes when data

compression is active

Acoustic signaling

Integrated piezo

Startup diagnostics

Power on selftest, visualization via LEDs

(controller, SRAM, EEPROM, DSP)

Adaptive line test

Dial tone test, pulse dial ring test via additional function in configuration

software

Telecommunications approvals

TBR21, TBR15, TIA/EIA/IS-968 for Europe, USA, and Canada

Hardware settings

4-pos. DIP switch for dial-up and permanent line operation (under removable

cover)

PSTN port (a/b line) (continued)

Switching input and output

Switching input

U

activates one or more of the following:

– Message to the local V.24 (RS-232) interface

– SMS (only in dial-up operation)

– Fax (only in dial-up operation)

– Output control at the remote station (via SMS)

Switching output

60 V DC/1 A or 42 V AC/1 A miniature switching relay, N/O contact,

activated by:

– Input control at the remote station

– SMS (only in dial-up operation)

– Local AT command

– AT command at the remote station

Signaling

ALR (red LED)

– Flashing: SMS/FAX error message to be sent

– Steady light: Alarm has been triggered

ERR (red LED)

– Steady light: Alarm cannot be triggered

Reset (acknowledgment) by:

– SMS (remote)

– AT command (local + remote)

– Button (local)

Text and telephone number memory

Text memory

SMS

Fax

160 characters

480 characters, 30 KB

Telephone number memory

20 telephone numbers with a maximum of 36 digits