SFH9202-2SLASH3 datasheet(11/11 Pages) OSRAM

11 / 11 page

SFH 9202

2007-04-03

Gurtung / Polarität und Lage

siehe Dokument: Short Form Katalog: Gurtung und

Verpackung - SMT-Bauelemente - Gehäuse:SMT RLS

Methode of Taping / Polarity and Orientation see document: Short Form Catalog: Tape and Reel -

SMT-Components - Package: SMT-RLS

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components

1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.

1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected

to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

SFH9202-2/3 датащи(PDF) 11 Page - OSRAM GmbH